您的瀏覽器不支援Javascript，部分功能將無法呈現。

:::

Research Achievements
Page 1 / Total 6 page(s)
  1. [Previous]
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. 6
  8. [Next]
Publications List
CatergoryWritingsAuthor
Journal Articles
  1. Jianhua Li, Chien-Chang Lin, Ganquan Xie, Michael Oristaglio, (2008), “AGILD WMT Ray-Tracing Tomography and its Application”, Accepted to be published in PIERS ONLINE.
  2. Chien-Chang Lin, Jianhua Li, Ganquan Xie, and Michael Oristaglio, (2008), ‘‘Improved Isoparameter FEM for Plastic and EM Modeling’’, Accepted to be published in PIERS ONLINE.
  3. Chien-Chang Lin, Ganquan Xie, and Jianhua Li, (2007),“Nondestructive Testing in Mechanical Engineering by Wave Inversion＂,PIERS ONLINE,Vol.3, No.6, pp.795-800.(096-2811-E-212-001-)
  4. B.J. Lin, C.C. Lin, W.Y. Jywe, S. Y. Lin, J. C. Lin, (2007), “Motion Curve Synthesis and Geometric Design of Intermittent Variable Speed Globoid Cam Mechanism”, Proceedings of the Institute of Mechanical Engineers Part C, Journal of Mechanical Engineering Science,(SCI, Impact factor = 0.3), Vol.221,No.3, pp.329-339.
  5. Ming-Chun Tseng, Hsin Her Yu, Shug-June Hwang, Chien-Chang Lin, and Kuang-Chyi Lee,(2006), “Thermal and Mechanical Effects on the Flexible Polymer Substrate,” Key Engineering Materials Vols. 324-325, pp. 1193-1196 (SCI, Impact factor =3.3484 )
  6. Kuang-Chyi Lee, Kuang-Chih Li, Hsin Her Yu, and Chien-Chang Lin, (2006), “Forced Response of Harmonic Mistuned Blade Disks,” Key Engineering Materials Vols. 324-325,pp. 145-148 (SCI, Impact factor =3.3484 )
  7. S. Y. Lin, J. C. Lin, C. C. Lin, W. Y. Jywe and B. J. Li, (2006), “Life Prediction System using Tool’s Geometrical Shape for High Speed Milling”, International Journal of Advanced Manufacturing Technology, Vol.30, No.7-8, pp.622-630 (SCI, Impact factor=0.4)
  8. Chien-Chang Lin and Gerald Her, (2005), “Calibrating and Volumetric Errors of a Precision Machine by a Tracker system,” Int’l J. of Advanced Manufacturing Technology, Vol. 26,No.l1-12, pp.1255-1267 ( SCI and EI)(Impact Factor = 0.352).
  9. J.C. Lin, S.Y. Lin, C.C. Lin , W.Y. Jywe, B.J. Lin, (2005), “Parting Line Selection as a Function of Injection Molding with Free Form Surface Using the FEM and Adductive Network”, Accepted by The International Journal of Advanced Manufacturing Technology (SCI, Impact factor=0.446)
  10. Kuang-Chyi Lee, Yuan-Cheng Liang and Chien-Chang Lin, (2005), “Analysis for Repairing the Cracked PVC Pipe”, Materials Science Forum, pp.P565~P570.(SCI, Impact factor =0.498)
  11. Kuang-Chyi Lee, Shug-June Hwang, Min-Hsun Cheng, Ye-Shiu Li, Chien-Chang Lin and Hsin-Her Yu, (2005), “Preparation and Characterization of the Modified Carbon Nanotubes Enhanced Epoxy Resin Composites”, Materials Science Forum, pp.1075~1080 (SCI, Impact factor = 0.498).
  12. Kuang-Chyi Lee and Chien-Chang Lin, (2005), A Vision-Measuring Method for an Imperfect Circle, Journal of the Chinese Institute of Industrial Engineers, Vol. 22, No. 1. pp.38-45.
  13. Chien-Chang Lin and Jui-Liang Her, (2004), “Angular Errors Measurement of a Rotary Table by a Laser Tracker System.” J. of CSME, Vol. 25, No. 2, pp.185-188 (EI).
  14. Chien-Chang Lin, Ganguan Xie, Jianhua Li, (2004), “Nondestructive Testing in Mechanical Engineering by Wave Velocity Inversion.” Chinese Journal of Mechanics-Series A (SCI & EI,Impact factor = 0.173), (under revision).
  15. Ganguan Xie, Chien-Chang Lin, and Jianhua Li, (2004), “New Inverse Method for Potential in Wave Propagation”, Inverse Problem (SCI), (accepted).
  16. G. Xie, J. Li, and Chien-Chang Lin, (2004), “New 3-D Stochastic Electromagnetic Modeling and Inversion Using Magnetic Integral Equation,” Three Dimensional Electromagnetic (SCI),Vol.3, accepted to be published.
  17. Ganguan Xie, Chien-Chang Lin, Jianhua Li, and Jiagi Liu, (2004), “ Magnetic Field Propagation in Nanometer Material Using GILD EM Modeling,” J. of Chinese Sciences (SCI), (accepted).
  18. Ganquan Xie, Chien-Chang Lin, Jianhua Li, (2003). “GILD EM Modeling in Geophysics and Nanometer Materials Using a Magnetic Field Integral Equation”, Three Dimensional Electromagnetics (SCI) III Vol.3, pp.11-12, 2003.
  19. Ganguan Xie, Chien-Chang Lin, and Jianhua Li, （2003）, “New 3-D GILD Mechanical Modeling and Inversion,” Mathematica Applicata (SCI), Vol. 16, No. 2, pp. 149-156.
  20. Chien-Chang Lin, Ganguan Xie, Jianhua Li, and Bor-Jeng Lin, (2003), “Deformation Analysis for Materials Using GILD Mechanical Modeling” (Invited paper). The Chinese Journal of Mechanics-Series A, (A special issue dedicated to Prof. T. C. T. Ting in celebration of his seventieth birthday), Vol. 19, No.l, pp.73-81 (SCI&EI) (Impact Factor =0.173).
  21. Bor-Jeng Lin, Chen-I Hung, Chien-Chang Lin, Wen-Yuh Jywe, (2002), “Constructive Geometrical Solid of Axial-Flow Far Blade by Generated Machining Method”, J. of The Chinese Society of Mechanical Engineers（EI）,Vol.23, No. 4, pp.291-300.
  22. Wenyuh Jywe, Chien-Chang Lin, Lih-Horng Shyu, Bor-Jeng Lin,(2002), “ The Development of Contouring Testing Devices for CNC Machine Tools”, The Journal of the CSME, Vol. 23,No.2, pp.143-153 (EI).
  23. G. Xie, J. Li, and Chien-Chang Lin, (2002), “SGILD EM Modeling and Inversion in Geophysics and Nanophysics Using Magnetic Filed Equations,” Three Dimensional Electromagnetics (SCI), Vol.2, also in SEG book (by Elsevier) Chapter 11, pp.193-213.
  24. Chien-Chang Lin and James T.S. Wang, （2001）, “Energy Release Rate of Double Beam-Plates with Repairing Elements,” Journal of Composite Materials（SCI＆EI）, Vol. 35,No. 19, pp1730-1746(Impact Factor = 0.604).
  25. James T. S. Wang and Chien-Chang Lin,（2000）, “On the Method of Continuous Analysis （Invited paper）,” The Chinese Journal of Mechanics（SCI＆EI）, Vol.16, No.1, pp.1-8.（A special issue dedicated to Prof. Yih-Hsing Pao in celebration of his seventieth birthday）(Impact Factor = 0.173).
  26. Yee-Shown Lin and Chien-Chang Lin,（2000）, “The Finite Element Model for Patch Repair Composite Laminated Plates with Delamination,”-Journal of Engineering, National Chung-Hsing University, Vol.11 No.1, pp.61-74.
  27. Chien-Chang Lin, Chuen-Horng Lin and James T.S.Wang, (2000), “On Some Aspects of Pin-Loaded Laminates,” International Journal of Solids and Structures,(SCI＆EI) (Impact Factor = 1.378), Vol.37, pp.599-625.(Cited No./Self Cited No.(Up to date) (2/1))(Cited No.(Recent 5 Year (2))
  28. Chien-Chang Lin and Chih-Yu Hsu,（1999）, “Static Shape Control of Smart Beam-Plates Laminated with Sine Sensors and Actuators,“ Smart Materials and Structures （SCI＆EI）(Impact Factor = 1.522) (Cited No./Self Cited No.(Up to date) (12/0))(Cited No.(Recent 5 Year (12)), Vol.8, pp.519-530.
  29. James T.S.Wang and Chien-Chang Lin, (1999), “A Method for Exact Series Solutions in Structure Mechanics,” ASME Journal of Applied Mechanics（SCI＆EI）, Vol.66, No.2,pp.380-387.
  30. Chien-Chang Lin and Huang-Nan Huang,（1999）, “Vibration Control of Beam-Plates with Bounded Piezoelectric Sensors and Actuators,“ Computers ＆ Structures （SCI＆EI）(Impact Factor = 0.741), Vol.73, pp.239-248. (Cited No./Self Cited No.(Up to date)(6/0))(Cited No.(Recent 5 Year (6))
  31. Chien-Chang Lin, Chuen-Horng Lin and James T.S.Wang, (1999), “The Use of a Direct Boundary Element Method for Pin-Loaded Plates,” AIAA Journal (SCI＆EI), Vol.37, No.8,pp.971-981. (Impact Factor = 0.870)
  32. Chien-Chang Lin, Huang-Nan Huang and Fang-Bo Yeh, (1999), “Dissipater Placement Design for Truss Structures via Balancing Theory,” Journal of Guidance, Control and Dynamics (SCI & EI) (Impact Factor = 0.822), Vol.22, No.4, PP.558-565.
  33. Chien-Chang Lin and Chuen-Horng Lin, (1999), “Stress Around Pin-load Hole in Composite Laminates Using Direct Boundary Element Method,” International Journal of Solids and Structures, (SCI & EI) (Impact Factor = 1.378) Vol.36, PP.763-783. (Cited No./Self Cited No.(Up to date) (2/1))(Cited No.(Recent 5 Year (1))
  34. Chien-Chang Lin and Shou-Hsiung Cheng, （1998）, “Buckling of Thin Sheet of Delaminated Plates with Repair Fasteners,” AIAA Journal (SCI & EI), Vol.36, No.12. pp.2236-2241(Impact Factor = 0.870).
  35. Fang-Bo Yeh, Chien-Chang Lin and Huang-Nan Huang,(1998), “Parametric Nevanlinna PickInterpolation Theory,” Proceedings of the National Science Council, R.O.C., Part A: Physical Sceience and Engineering（EI）, Vol.22, No.6, pp.723-733.
  36. Chih-Yu Hsu, Chien-Chang Lin and Lothar Gaul, (1998), “Vibration and Sound Radiation Controls of Beams Using Layered Model Sensors and Actuators,” Smart Material and Structures (SCI & EI) (Impact Factor = 1.522) (Cited No./Self Cited No.(Up to date)(9/0))(Cited No.(Recent 5 Year (5)), Vol.7, pp.446-455.
  37. Chien-Chang Lin and C.S.Tseng, （1998）, “Free Vibration of Polar Orthotropic Laminated Circular and Annular Plates,” Journal of Sound and Vibration (SCI & EI), 209（5）,pp.797-810. (Impact Factor = 0.822) (Cited No./Self Cited No.(Up to date) (8/0))(Cited No.(Recent 5 Year (5))
  38. Chih-Yu Hsu, Chien-Chang Lin and Lothar Gaul, （1997）, “Shape Control of Composite Plates by Bonded Actuators with High Performance Configuration,” Journal of Reinforced Plastics and Composites (SCI & EI) (Impact Factor = 0.377) (Cited No./Self Cited No.(Up to date) (12/0))(Cited No.(Recent 5 Year (10)), Vol.16, No.18, pp.1692-1710.
  39. Chien-Chang Lin and Tseng-Chung Ko, (1997), “Free Vibration of Bonded Plates,”Computers and Structures, Vol.64, No.1-4, pp.441-452 (Impact Factor = 0.741) (Cited No./Self Cited No.(Up to date) (5/0))(Cited No.(Recent 5 Year (4)).
  40. Chien-Chang Lin, Chih-Yu Hsu and Huang-Nan Huang, (1997), “Finite Element Analysis on Deflection Control of Plates with Piezoelectric Actuators,” Journal of Composite Structures (SCI & EI), Vol.35, pp.423-433. (Impact Factor = 0.796) (Cited No./Self Cited No.(Up to date) (23/0))(Cited No.(Recent 5 Year (14))
  41. Shou-Hsiung Cheng, Chien-Chang Lin and James T.S. Wang,(1997), “Local Buckling of Delaminated Sandwich Beams Using Continuous Analysis,” International Journal of Solids and Structures (SCI & EI), Vol.34, No.2, pp.275-288. (Cited No./Self Cited No.(Up to date)(4/1))(Cited No.(Recent 5 Year (3))
  42. James T.S.Wang, Hua-Nan Pu and Chien-Chang Lin, (1997), “Buckling of Beam-Plates having Multiple Delaminations,” Journal of Composite Materials (SCI & EI), Vol.31, No.10, pp.1002-1025. (Impact Factor = 0.796) (Cited No./Self Cited No.(Up to date) (7/0))(Cited No.(Recent 5 Year (6))
  43. Chien-Chang Lin, Shou-Hsiung Cheng and James T.S. Wang,(1996), “Local Buckling of Delaminated Composite Sandwich Plates,” AIAA Journal (SCI & EI), Vol.34, No.10,pp.2176-2183. (Impact Factor = 0.870)
  44. James T.S.Wang and Chien-Chang Lin, (1996), “Dynamic Analysis of Generally Supported Beams using Fourier Series,” Journal of Sound and Vibration (SCI & EI), 196(3),pp.285-293. (Impact Factor = 0.822) (Cited No./Self Cited No.(Up to date) (12/1))(Cited No.(Recent 5 Year (8))
  45. James T. S. Wang and Chien-Chang Lin, (1996), “Engineering Analysis of Buckling of Delaminated Beam-Plates,” Journal of Composite Structures (SCI & EI), Vol.34, pp.397-407.(Impact Factor = 0.796) (Cited No./Self Cited No.(Up to date) (8/0))(Cited No.(Recent 5 Year (7)).
  46. Ine-Wei Liu and Chien-Chang Lin,(1995), “A Multi-Criteria Objective Function Optimization for Elastic Reinforced Beams,” The Chinese Journal of Mechanics, Vol.11,No.3, pp.177-183. (Impact Factor = 0.173)
  47. Tseng-Chung Ko, Chien-Chang Lin and Ru-Chu Chu, (1995), “Vibration of Bonded Laminated Lap Joint Plates Using Adhesive Interface Elements,” Journal of Sound and Vibration (SCI & EI), 184(4), pp.567-583. (Impact Factor = 0.822)
  48. Chien-Chang Lin, Chu-Cheng Ko and Chih-Yu Hsu, (1995), “Interlaminar Stresses in General Laminates with Straight Free Edges,” AIAA Journal (SCI & EI), Vol.33, No.8,pp.1471-1476. (Impact Factor = 0.870)
  49. James T.S., Shou-Hsiung Cheng and Chien-Chang Lin, (1995), “Local Buckling of Delaminated Beams and Plates Using Continuous Analysis,” Journal of Composite Material (SCI & EI), Vol.29, No.10, pp.1374-1402. (Impact Factor = 0.604)
  50. Ine-Wei Liu, Tienfuay Kerth and Chien-Chang Lin, (1995), “A Conforming Quadrilateral Plate Bending Element with Shear Deformation,” Computers & Structures (SCI & EI),Vol.56, No.1, pp.93-100. (Impact Factor = 0.741)
  51. James T.S.Wang and Chien-Chang Lin,(1995), “Stresses in Open-Ended Cylindrical Shells,”ASME Journal of Applied Mechanics (SCI & EI), Vol.62, pp.229-230. (Impact Factor =1.012)
  52. Tseng-Chung Ko, Ru-Chu Chu and Chien-Chang Lin, (1994), `` Balanced and Unbalanced Patching of Cracked Lap Joints Using Weighted Adhesive Plate Element," J. of Theoretical and Applied Fracture Mechanics (SCI & EI), 21, pp.177-195. (Impact Factor = 0.806)
  53. James T. S. Wang and Chien-Chang Lin, (1994), `` Stresses in Composite Cylinders," Int. Journal of Composite Engineering (SCI & EI), Vol. 4, No. 11, pp. 1129-1141.
  54. Ine-Wei Liu and Chien-Chang Lin, (1994), `` A New Conforming Plate Bending Element for the Analysis of Composite Laminates," Proceedings of the National Science Council, R.O.C.,Part A: Physical Science and Engineering (EI), Vol. 18, No. 6, pp. 561-569.
  55. Chien-Chang Lin and Chu-Cheng Ko, (1994), ``A New Method for Interlaminar Stresses in Symmetric Laminated Plates Containing a Circular Hole," Proceedings of the National Science Council, R.O.C., Part A: Physical Science and Engineering (EI), Vol. 18, No. 5, pp.485-494.
  56. Yee-Shown Lin, Chien-Chang Lin, and Ru-Chu Chu, (1994), ``Bending Effects on Adhesively Bonded Cracked Plates," Journal of the Chinese Institute of Engineers (EI),Vol.17, No.1, pp. 95-106.
  57. James T. S. Wang and Chien-Chang Lin, (1993), ``Stresses in Rotating Composite Cylindrical Shell," Composite Structures (SCI & EI), Vol.25, pp.157-164. (Impact Factor =0.796)
  58. Chien-Chang Lin and Chuen-Horng Lin, (1993), `` Stress and Strength Analysis of Bolted Composite Joints Using Direct Boundary Element Method," Composite Structures (SCI & EI), Vol.25, pp.209-215. (Impact Factor = 0.796)
  59. Chien-Chang Lin and Tseng-Chung Ko, (1993), ``Adhesive Interface Element for Bonding of Laminates Plates," Composite Structures (SCI & EI), Vol.25, pp.217-225. (Impact Factor = 0.796)
  60. Ine-Wei Liu and Chien-Chang Lin, (1993), ``A New Conforming Quadrilateral Plate Bending Element," Int. J. for Numerical Methods in Engineering (SCI & EI), Vol.36,pp.2921-2937. (Impact Factor = 1.501)
  61. Chu-Cheng Ko and Chien-Chang Lin, (1993), ``Analysis of Interlaminar Stresses around a Hole in Symmetric Cross-ply Laminates under Bending and Torsion," AIAA Journal (SCI & EI), Vol.31, No.6, pp.1118-1124. (Impact Factor = 0.870)
  62. Chien-Chang Lin and Yee-Shown Lin, (1993), ``Finite Element Model of Single-Lap Adhesive Joint," Int. J. of Solids and Structures (SCI & EI), Vol.30, No.12, pp.1679-1692.(Impact Factor = 1.378)
  63. Chien-Chang Lin,Ru-Chu Chu, and Yee-Shown Lin, (1993), ``A Finite Element Model for Single-Side Crack Patching," Engineering Fracture Mechanics (SCI & EI),Vol.46, No.6, pp.1005-1021. (Impact Factor = 1.299)
  64. Chien-Chang Lin and Chuen-Horng Lin, (1992), ``Stress and Strength Analysis of Bolted Joints of Composite Plates Using Direct Boundary Element Method," Transactions of the Aero. & Astro. Society of R.O.C., Vol.24, No.2, pp. 191-197.
  65. Chu-Cheng Ko, Chien-Chang Lin, and Hsiang Chin, (1992), ``Analytical Studies for Predicting the Delamination Initiation Around Holes in Symmetric Laminates," J. Composite Structures (SCI & EI), Vol.22, pp.187-191. (Impact Factor = 0.796)
  66. Ine-Wei Liu and Chien-Chang Lin, (1992), ``Indeterminate Approach to the Optimization of Frame Structures With Stability Constraints," Computers & Structures (SCI & EI), Vol.44,No.5, pp.973-982. (Impact Factor = 0.741)
  67. Chu-Cheng Ko and Chien-Chang Lin, (1992), ``Method for Calculating the Interlaminar Stresses in Symmetric Laminates Containing a Circular Hole," AIAA Journal (SCI & EI),Vol.30, No.1, pp.197-204. (Impact Factor = 0.870)
  68. Chien-Chang Lin, Ine-Wei Liu and T. S. Yang, (1991), ``Application of Array Management System for the Development of Structural Analysis Program," Computers & Structures (SCI & EI), Vol.41, No.5, pp.917-926. (Impact Factor = 0.741)
  69. Ine-Wei Liu and Chien-Chang Lin, (1991), ``Application of Multipliers Method to the Structural Weight Minimization," The Chinese Journal of Mechanics, Vol.7, No.3,pp.177-185.
  70. Chien-Chang Lin and Ann-Jenn Yu, (1991), ``Optimum Weight Design of Composite Laminated Plates," Computer & Structures (SCI & EI), Vol.38, No.5-6, pp.581-587.
  71. Chien-Chang Lin and Ann-Jenn Yu, (1991), ``Optimum Weight Design of Composite Laminated Plates," The Chinese Journal of Mechanics (SCI & EI), Vol.7, No.1, pp. 61-67 .
  72. Ine-Wei Liu and Chien-Chang Lin, (1990), `` Optimum Design of Composite Wing Structures by a Refined Optimality Criterion," J. Composite Structures (SCI & EI), Vo.17,pp.51-65. (Impact Factor = 0.796)
  73. Chien-Chang Lin and Ine-Wei Liu, (1990), ``Optimal Design of Plate Structures with Buckling Constraint," AIAA Journal (SCI & EI), Vol.28, pp.951-953. (Impact Factor =0.870)
  74. Chien-Chang Lin and Y. C. Tu, (1989), ``Free Vibration of Elliptical Laminated Plate Using Higher-Order Theory," The Chinese Journal of Mechanics, Vol.5, No.1, pp.11-18.
  75. Ine-Wei Liu and Chien-Chang Lin, (1989), ``A Refined Optimality Criterion Technique Applied to Aircraft Wing Structural Design," Computer & Structures (SCI & EI), Vol.33,No.2, pp.427-434. (Impact Factor = 0.741)
  76. Chien-Chang Lin and Ching-Suong Kuo, (1989), ``Buckling of Laminated Plate With Hole," Journal of Composite Materials (SCI & EI), Vol.23, No.6, pp.536-553. (Impact Factor =0.604)
  77. Chien-Chang Lin and Ine-Wei Liu, (1989), `` Optimal Design for Frame Structures Based on An Optimality Criterion Including Buckling Constraint," Computer & Structures (SCI & EI),Vol.31, No.4, pp.535-544. (Impact Factor = 0.741)
  78. Chien-Chang Lin and Tzong-Shuon Yang, (1988), ``Application of Multiplier-Update Method to the Minimum Weight Design of Elastic Plates," Computer & Structures (SCI & EI), Vol. 29, No. 6, pp. 943-948. (Impact Factor = 0.741)
  79. Chien-Chang Lin and Chu-Cheng Ko, (1988), ``Stress and Strength Analysis of Finite Composite Laminates with Elliptical Hole," Journal of Composite Materials (SCI & EI), Vol.22, No. 4, pp. 373-385. (Impact Factor = 0.604)
  80. Chien-Chang Lin and Shann-Chuen Lin, (1987), ``Buckling of Elliptical Laminated Plates," Journal of the Chinese Society of Mechanical Engineering (EI), Vol. 8, No. 3, pp. 173-181.
  81. Chien-Chang Lin (1986), ``Boundary-Layer Effects in Composite Laminates," Proceedings of the National Science Council, R.O.C., Part A: Physical Science and Engineering (EI), Vol.10, No. 3, July, pp. 281-289.
  82. T. S. Tsui, Y. P. Chu, and Chien-Chang Lin (1984), ``Some Mathematical Properties of Trie Hashing," Journal of Science and Engineering, Vol. XXI, pp. 173-188. (in Chinese).
  83. Chien-Chang Lin (1984), ``A General Tensor Theory of Quadratic Failure Criterion and its Application on the Optimal Design of Composite Laminates," Journal of Science and Engineering, Vol. XXI, pp. 123-135. (in Chinese).
  84. Chien-Chang Lin, (1984), ``Dynamic Response of a Diagonal Line-Loaded Laminated Rectangular late," Journal of Science and Engineering, Vol. XXI, pp. 109-121.
  85. Chien-Chang Lin, (1983), ``A Modification of Bolotin's Method and its Application to Laminates ," The Chinese Journal of Mechanics, Vol. I, No. 1, pp. 7-13.
  86. Chien-Chang Lin, (1979), ``Inplane Inertia Effects for Unsymmetrically Laminated Rectangular Plates," Journal of Science and Engineering, (Chung-Hsing Univ.), Vol. XVI, pp.151-159.
  87. Chien-Chang Lin, (1978), ``A Note on the General Analysis for Longitudinal Vibration of a Spring- lock System," Journal of Science and Engineering, (Chung-Hsing Univ.), Vol. XV,pp. 163-169.
  88. Chien-Chang Lin, (1977), ``An Application of Stochastic Processes to Mechanics," Journal of Science and Engineering, (Chung-Hsing Univ.), Vol. XIV, pp. 301-308.
  89. Chien-Chang Lin, (1975), ``An Asymptotic Method for Analysis of Flexural Vibrations of Rectangular Orthotropic Plate ," Journal of Science and Engineering, (Chung-Hsing Univ.),Vol. XII, pp. 89-96.
  90. Chien-Chang Lin, (1974), ``Exact Solutions for Free Transverse Vibrations of Unsymmetrically Laminated Rectangular Plates," Journal of Science and Engineering, (Chung-Hsing Univ.), Vol. XI, pp. 139-152.
  91. Chien-Chang Lin and W. W. King, (1974), ``Free Transverse Vibrations of Rectangular Unsymmetrically Laminated Plates," Journal of Sound and Vibration (SCI & EI), Vol. 36(1),pp. 91-103. (Impact Factor = 0.828)
  92. Wilton W. King, and Chien-Chang Lin, (1974), ``Applications of Bolotin's Method to Vibration of Plates," AIAA Journal (SCI & EI), Vol. 12(3), pp.399-401. (Impact Factor =0.870)
Chien-Chang Lin
Journal Articles
  1. Cho-Chung Liang, Tzu-Hao Liu and Wei-Ming Tseng（2007）“Numerical Simulation of Water Plume of Single Charge Explosion in Shallow Water” Ocean Engineering（Reviewing）. SCI, EI
  2. Cho-Chung Liang and Chia-Hua Yu, Chin Wu（2007）“A design Study on the Competition Go-Kart Frame Considering Torsional Stiffness” Journal of Automobile Engineering-Part D（Reviewing）. SCI, EI
  3. Cho-Chung Liang, Chi-Feng Chiang and Yeur-Chang Wu（2007）“Modeling a Suspension System for Riding Quality Evaluation” International Journal of Mechanical Science（Reviewing）. SCI, EI
  4. Cho-Chung Liang and Giang-Num Le（2007）“Bus Rollover Simulation with LS-DYNA as an Approval Method According to ECE R66 and FMVSS220 Regulation” Journal of Automobile Engineering-Part D （Reviewing）. SCI, EI
  5. Cho-Chung Liang and Chi-Feng Chiang（2007） “Modeling of a Seated Human Body Exposed to Vertical Vibrations in Various Automotive Postures” INDUSTRIAL HEALTH（Inpress）.
  6. Liang, C.C., Chiang, C.F., T. G. Nguyen （2007） “Biodynamic responses of seated pregnant subjects exposed to vertical vibrations in driving conditions”, Vehicle System Dynamics 45（11）, pp. 1017~1049.
  7. Cho-Chung Liang and Chi-Feng Chiang（2006）“A study on biodynamic models of seated human subjects exposed to vertical vibration” International Journal of Industrial Ergonomics, 36, pp. 869-890.
  8. 梁卓中，劉子豪，曾韋銘（2006）“淺水爆炸水柱之驗證與評估”中國造船暨輪機工程學刊，第二十五卷，第一期，二月，第17-33頁，EI。
  9. Cho-Chung Liang, Yun-Shiou Tai （2006）, “Shock Responses of a Surface Ship Subjected to Noncontact Underwater Explosions” Ocean Engineering, vol.33, pp748-772, SCI, EI.
  10. 賴文豪，梁卓中，任展勇（2005）“水下載具壓力殼開孔結構之非線性靜態研究”中國造船暨輪機工程學刊，第二十四卷，第二期，五月，第13-24頁，EI。
  11. Ching-Yu Hsu, Cho-Chung Liang, Yuh-Shiou Tai （ 2005） “The study of the crack initiation fatigue life estimation for the cylindrical pressure hull with holes”，Journal of the Taiwan Society Naval Architects and Marine Engineers, Vol.24, No.3, pp. 165-183, NSC-93-2611-E-012-001 EI.
  12. Ching-Yu Hsu, Cho-Chung Liang, Sheau-wen Shiah, Chan-Yung Jen（2005）“ A study of stress concentration effect around penetrations on curved shell and failure modes for deep-diving submersible vehicle” Ocean Engineering, vol.32, No.8-9, June, 2005, pp1098-1121, SCI, EI.
  13. 梁卓中，戴毓修，劉子豪（2005）, “炸藥水下爆炸效應之研究” 中國造船暨輪機工程學刊，第二十四卷，第一期，二月，第39-57 頁，EI。
  14. Cho-Chung Liang, Ming-Fang Yang and Ping-Wen Wu （2005） “Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application”, Ocean Engineering,March, vol.32, No.3-4, pp441-468, SCI, EI.
  15. 梁卓中，夏曉文，任展勇，陳弘文（2004）“傳統圓筒加勁型壓力殼與多球加勁型壓力殼結構強度比較之研究” 中國造船暨輪機工程學刊，第二十三卷，第三期，第125-141 頁, EI。
  16. 鄧作樑，梁卓中，陸正中（2004）“船艦中空裝甲防護結構之抗彈性能分析”中國造船暨輪機工程學刊，第二十三卷，第一期，第39-47 頁, EI。
  17. 鄧作樑，梁卓中，吳彥毅，陳弘文（2004） “平面纏繞設計參數對壓力容器端蓋滑移趨勢之影響”，中國航空太空學會學刊，第三十六卷，第二期，第151-162 頁。
  18. Cho-Chung Liang and Chan-Yung Jen（2004）, “Optimum Design of Multiple Intersecting Spheres Deep-Submerged Pressure Hull ” Ocean Engineering Vol31, No:2, pp177-199, SCI, EI.
  19. Cho-Chung Liang and Wen-Hui Chen （2004） “The Optimum Control of Thruster System for Dynamically Positioned Vessels”, Ocean Engineering, Vol.31, No.1, pp97-110 SCI, EI.
  20. 梁卓中，夏曉文，任展勇，陳弘文（2003）“深潛多球加勁型壓力殼結構最佳化設計之探討”中國造船暨輪機工程學刊，第二十二卷，第四期，第159-172 頁。
  21. Cho-Chung Liang and Hung-Wen Chen （ 2003 ） “Optimum Design of Filament-Wound Multilayer-Sandwich Submersible Pressure Hulls” Ocean Engineering, Vol 30, NO: 15 pp 1941-1967 SCI, EI.
  22. 梁卓中，楊明放，王正煥，陳弘文 （2003），“平衡平面纖維纏繞不等開口固體火箭發動機端蓋之結構設計與分析”，中國航太工程學刊，第三十五卷，第二期，第123-133 頁。
  23. Cho-Chung Liang, Ming-Fang Yang and Ping-Wen Wu （2003） “Resistant Performance of Perforation in Protective Structures Using a Semi-Empirical Method With Marine Applications”, Ocean Engineering, Vol.30, No.9, pp.1137-1162. SCI, EI.
  24. 鄧作樑，梁卓中，顏燦輝（2003）“艦用飛彈垂直發射箱外形設計之研究”，中國造船暨輪機工程學刊，第二十二卷，第一期，第39-46 頁。
  25. 梁卓中，鄧作樑，江基風，余慶雲 （2003） “船艦上的人體承受垂向爆震之生物動態響應”， 中國造船暨輪機工程學刊，第二十二卷，第二期，第73-86 頁。
  26. C.C. Liang, H.W. Chen （2003） “Optimum Design of Fiber-reinforced Composite Cylindrical Skirts for Solid Rocket Cases Subjected to Buckling and Overstressing Constraints”, Composites Part B-Engineering Vol .34/3 pp 273 – 284 SCI, EI.
  27. C.C. Liang, M. F. Yan, Y. S. Tai （2002） “Prediction of shock response for a quadrupod-mast using response spectrum analysis method” Ocean Engineering, Vol.29 ,No.8, pp. 887-914. SCI, EI.
  28. C.C. Liang, H.W. Chen, C.H. Wang （2002） “Optimum design of dome contour for filament-wound composite pressure vessels based on a shape factor”, Composite structures, Vol.58, No.4, pp.469-482. SCI, EI.
  29. 梁卓中，楊明放，陳弘文 （2002） “纖維強化三明治夾層圓柱形壓力殼結構之最佳化設計”，中國造船暨輪機工程學刊，第二十一卷，第三期，第179-195 頁。
  30. 鄧作樑，梁卓中，璩貽安，李明俊 （2002） “金屬防護結構承受撞擊之侵徹行為分析”，火藥技術，第十八冊，第一期，第63-82 頁。
  31. 梁卓中，楊明放，吳炳文 （2002） “應用半理論半經驗法探討防護結構之抗貫穿能力”，中國造船暨輪機工程學刊，第二十卷，第二期，第11-30 頁。
  32. 梁卓中，楊明放，吳炳文 （2002） “多層防護結構抗貫穿能力之探討”，中國造船暨輪機工程學刊，第二十一卷，第一期，第11-26 頁。
  33. 梁卓中，楊明放，吳炳文 （2002） “應用多重線性迴歸半經驗法研究防護結構之抗貫穿能力”，中國造船暨輪機工程學刊，第二十一卷，第二期，第93-115 頁。
  34. 梁卓中，戴毓修 （2001） “以反應譜分析法探討船艦舵部之爆震反應”，中國造船暨輪機工程學刊，第二十卷，第三期，第1-16 頁。
  35. 梁卓中，鄭文惠，吳吉昌 （2001） “應用長基線聲學定位系統於潛體潛航定位之研究”，中國造船暨輪機工程學刊，第二十卷，第一期，第61-68 頁。
  36. Cho-Chung Liang, Ming-Fang Yang and Ping-Wen Wu （2001） “Optimum Design of Metallic Corrugated Core Sandwich Panels Subjected to Blast Loads”, Ocean Engineering, Vol. 7, pp. 825-861.SCI, EI.
  37. Cho-Chung Liang,Yuh-Shiou Tai and Wen-Hao Lai （2001） “The Free Vibration Analysis of Submerged Cantilever Plates”, Ocean Engineering , Vol.28, No.9, pp.1225-1245. SCI, EI.
  38. Cho-Chung Liang,Ching-Yu Hsu and Wen-Hao Lai （2001） “A Study of Transient Responses of Submerged Spherical Shell under Shock Waves” Ocean Engineering, Vol.28, No.1 852611E01400005, pp. 71-94, SCI, EI.
  39. 梁卓中，吳偉榮， 廖清照，鄭文惠 （2000） “海域工作船動態定位控制系統之研究”，中國造船暨輪機工程學刊，第十九卷，第四期，第23-32 頁。
  40. 梁卓中，戴毓修，李必良 （1999） “環板水中自由振動之研究”，中國造船暨輪機工程學刊，第十九卷，.第一期，第9-25 頁。
  41. Cho-Chung Liang, Tso-Liang Teng and Wen-Hui Cheng （1999） “An effective Control System of Thrust and Moment Modulation for a Dynamically Positioned Vessel”, Marine Geodesy , Vol.22, No.4,pp. 211-227 SCI.
  42. 梁卓中，徐慶瑜 （1999） “類海象級潛艇壓力殼強度之探討”，中國造船暨輪機工程學刊， 第十八卷，第四期，第55-72 頁。
  43. 鄭文惠，梁卓中，廖清照 （1999） “短基線水下定位系統估算模式之研究”，中國造船暨輪機工程學刊，第十八卷，第三期，第39-50 頁。
  44. 徐慶瑜，梁卓中 （1999） “曲殼薄化區應力集中之研究”，中國造船暨輪機工程學刊，第十八卷，第三期，第1-15 頁。
  45. Cho-Chung Liang, Tso-Liang Teng and Wen-Hui Cheng （1999） “A Study of Short Baseline Acoustic Positioning System of Offshore Vessels”, Marine Geodesy, Vol.22, No. 1, pp. 19-30, 872611E0140004.EI.
  46. T.L. Teng, C.C. Liang and C.C. Liao （1999） “Nonlinear Forced Vibration Analysis of the Rectangular Plates by the Fourier Series Method”, Computation Mechanics. Vol.23, No.1, pp.1-7, 852611E01400005. SCI, EI.
  47. Cho-Chung Liang, Yuh-Shiou Tai and Pi-Liang Li （1999） “Natural Frequencies of Annular Plates Having Contact with Fluid”, Journal of Sound and Vibrations, Vol.228, No.5, pp.1167-1181. SCI, EI.
  48. Cho-Chung Liang, Ching-Yu Hsu and Hung-Wei Chen （1998） “Curvature effects on Stress concentrations around circular hole in Opened Shallow Cylindrical Shell under External Pressure”,International Journal of Pressure Vessels and Piping, Vol.75, pp.749-763, 872611E014 001.
  49. Cho-Chung Liang, Tso-Liang Teng and Wen-Hao Lai （1998） “A Study of diving depth on deep-diving submersible vehicle”, International Jounal of Pressure Vessels and Piping, Vol.75, pp.447-457. SCI, EI.
  50. T.L. Teng and C.C. Liang （1998） “The Realization of Boundary Conditions in the Vibration Analysis of Plates”, Journal of The Franklin Institute. Vol.335B. No.5, pp.799-812. SCI, EI.
  51. Cho-Chung Liang, Wen-Hao Lai and Ching-Yu Hsu （1998） “Study of the Nonlinear Responses of a Submersible Pressure Hull”, Int. J. of Pressur Vessels and Piping, Vol.75, No.2, pp.131-149. SCI, EI.
  52. 梁卓中，賴文豪，李必良 （1998） “考慮流固藕合效應之環板水下振動研究”，中國造船暨輪機工程學刊，第十七卷，第二期，第17-30 頁。
  53. 梁卓中，張福安，賴文豪 （1998） “簡支矩形嵌板之水下動態反應研究”，中國造船暨輪機工程學刊，第十七卷，第一期，第21-37 頁，862611E014001。
  54. Cho-Chung Liang, Ching-Yu Hsu and Huei-Rong Tsai （1997） “Minimum Weight Design of Submersible Pressure Hull under Hydrostatic Pressure”, Computers & Structures, Vol.63, No.2,pp.187-201. SCI, EI.
  55. Tso-Liang Teng, Cho-Chung Liang and Chiang-Cho Liao （1996） “Optimal Design of a Dynamic Absorber Using Polymer-Laminated Steel Sheets”, Computers & Structures, Vol.60, No.6, pp.981-988.SCI,EI.
  56. Tso-Liang Teng, Cho-Chung Liang and Ching-Cho Liao （1996） “Transient Dynamic Large Deflection Analysis of Panel structure Under Blast Loading”, JSME International Journal, Vol.39, No.4, pp.591-597,.852611E01400005. SCI, EI.
  57. 鄧作樑，梁卓中，曹魯屏 （1996） “巴可碼脈波壓縮系統之研製”，中國造船暨輪機工程學刊，第十五卷，第二期，第27-34 頁。
  58. 梁卓中，鄧作樑，余國雄 （1995） “制振鋼板動態吸振器之研究”，中國造船暨輪機工程學刊，第十四卷，第一期，第15-31 頁。
  59. Liang, C.C., Liao, C.C., and Teng, T.L （1994） “A Combimed Gerkin-Perburation Method for Nonlinear Dynamic Response of Ship Panel under Blast Loading”, J. of SNAME, R.O.C., Vol.13, No.1,pp.79-98.
  60. Liang, C.C., Liao, C.C., and Teng, T.L （1994） “Optimal Design of Unstayed Polemast on Navy Surface Ship”, Computers & Structures, Vol.50, No.3, pp.317-323, 820210D0104501. SCI, EI.
  61. Liang, C.C., Yang, M.F. and Chen H.W. （1993） “Elastic-plastic Axisymmetric Failure of Swedged Stiffened Cylindrical Pressure Hull Under External Pressure”, Journal of Ship Reseach, Vol.37, No.2, pp.176-188, 820410D0211011.
  62. Liang, C.C., Liao, C.C., Teng, T.L. and Jing Y.Y. （1992） “A Study of Strain Estimation in Stream Generator Dented Tubes”, J. of SNAME, R.O.C. Vol.11, No.2, pp.41-58.
  63.  Yang, M.F., Liang, C.C. and Chen, C.H. （1992） “A Rational Shape Design of Externally Pressure Torispherical Dome Ends under Buckling Constraints”, Computers & Structures, Vol.43, No.5, pp.839-851, 800210D021101.
  64. Liang, C.C., Chiang, C.F. and Chao, H.M. （1991） “A study of Quadrupod Mast on Naval Surface Ship under Adverse Sea Condition”, J. of SNAME, R.O.C. Vol.10, No.1, pp.49-69.
  65. Liang, C.C., Liao, C.C. and Ma, Y.C. （1991） “A Large Deformation Elastic-plastic Dynamic Analysisof Square Plate and Spherical Shell Subjected to Shock Loading”, Computers & Structures,Vol.39, No.6, pp. 653-661. SCI, EI.
  66. Yuan, K.Y., Liang, C.C., and Ma, Y.C. （1991） “Investigation of the Cone Angle of a Novel Swedged-Stiffened Pressure Hull”, Journal of Ship Research, Vol.35, No.1, pp.83-86. SCI, EI.
  67. Yuan, K.Y., Liang, C.C., and Ma, Y.C. （1990） “The Estimation of the Accuracy and Efficiency of the Backtrack Programming Method for Discrete-Variable Structural Optimization Problems”, Computer & Structures, Vol.36, No.2, pp.211-222. SCI, EI.
  68. Yuang, K.Y., Liang, C.C. （1990） “Finite Element Simulation of the Deformation Behaviour of Corrugated Cylindrical Shell Food Can during the Strillization Process”, J. of Strain Analysis, Vol.25,No.1, pp.42-49. SCI, EI.
  69. Liang, C.C., Liao, C.C., and Ma, Y.C. （ 1990） “Optimum Cone Angle Design of a Novel Swedged-Stiffened Cylindrical Pressure Hull”, J. of SNAME, R.O.C., Vol.19, No.1, pp.89-102.
  70. Yuan, K.Y., Liang, C.C. （1989） “Nonlinear Analysis of Axisymmetric Shell using Three Noded Degenerated Isoparametric Shell Element”, Computers & Structures, Vol. 36, No.6, pp. 1225-1239.SCI, EI.
  71. Yuan, K.Y., Liang, C.C., and Ma, Y.C. （1989） “Elastic instability Analysis of Axisymmetric Thin Shell using Doubly-Curved Truncated Element under External Pressure Loads”, J. of SNAME, R.O.C.,Vol.8, No.1, pp.39-56.
  72. 袁光亞，梁卓中，廖清照，鄭文惠 （1988） “排水型快艇舯剖面結構最適化設計之研究”，中國造船暨輪機工程學刊，第七卷，第一期，第111-214 頁。
  73. Yuan, K.Y., Liang, C.C. （1988） “The Finite Element for the Deformation Behaviour of Corrugated Cylindrical Food Can during the Sterilization”, J. of the Chinese Society of Mechanical Engineers, Vol.9,No.6, pp.393-403.
  74. Yuan, K.Y., Liang, C.C., and Lu, C.Y. （1987） “F. E. Geometrically Nonlinear Analysis of Axisymmetric Shell Considering Finite Rotation”, J. of SNAME, R.O.C., Vol.16, No.1.
  75. 卲承之，梁卓中 （1986） “油輪縱材與橫材連接結構之有限單元分析”，中正嶺學報，第十五卷，第一期，第11-24 頁。
  76. Liang, C.C. （1982） “A study of Stress Analysis on Ship Stiffened Plates”, J. of Chung Chueng Institute of Technology, R.O.C., Vol.12, No.1, pp.167-189.  
Cho-Chung Liang
Journal Articles
  1. Chih-Keng Chen, Trung-Kien Dao and Hai-Ping Lin, 2007, “A Compensated Yaw Moment Based Vehicle Stability Controller,” submitted to International Journal of Vehicle Design. (SCI, EI).
  2. Chih-Keng Chen, James Hwang and Trung-Kien Dao, 2007, “Performance Optimization by Taguchi Method for the Iterative Learning Control of a Pneumatic X-Y Table,” submitted to Asian Journal of Control (SCI, EI).
  3. Chih-Keng Chen and Thanh-Son Dao, 2007, JSME Journal of System Design and Dynamics, Vol. 1, No.3, pp 536-547 Special Issue on the Third Asian Conference on Multibody Dynamics
  4. Chih-Keng Chen and James Hwang, 2006, “PD-Type Iterative Learning Control for Trajectory Tracking of Pneumatic X-Y Table with Disturbances,” JSME International Journal, series C, Vol. 49, No.2, pp 520-526 (SCI, EI)
  5. Chih-Keng Chen and Thanh-Son Dao, 2006, “Fuzzy Control for Equilibrium and Roll-Angle Tracking of an Unmanned Bicycle,” Multibody Systems Dynamics, Vol. 15, No.4, pp 321-346 (SCI)
  6. Chih-Keng Chen and James Hwang, 2005, “Iterative Learning Control for Position Tracking of a Pneumatic Actuated X-Y Table,” Control Engineering Practice, Vol. 13, pp 1455-1461 (SCI, EI).
  7. Chih-Keng Chen, Thanh-Son Dao and Chih-Kai Yang, 2005, “Turning Dynamics and Equilibrium of Two-Wheeled Vehicles,” KSME, Journal of Mechanical Science and Technology, Vol.19, No.1-special issue, pp. 377-387. (SCI, EI Journal).
  8. Chih-Keng Chen, Chi-Pan Hwang and Chien-Chung Su, 2005, “Implementation of a PC-Based ABS Systems with CAN-bus Interfaces on an Experimental Platform,” International Journal of Vehicle Design, Vol.37, No.4, pp 343-357. (SCI, EI Journal).
  9. Chih-Keng Chen and Chia-Hao Shih, 2004, “Spatial Dynamics of Tank Motion for Real-Time Simulation,” Vehicle System Dynamics, Vol.42, No. 4, pp 259-288. (SCI, EI Journal).
  10. Chih-Keng Chen and Ming-Chang Shih, 2004, “PID-Type Fuzzy Control for Anti-lock Brake Systems with Parameter Adaptation,” JSME International Journal, Series C. Vol.47, No.2, pp 675-685. (SCI, EI Journal).
  11. Chih-Keng Chen, Jian-Da Wu, 2004, “Development of the Fuzzy Controlled ABS Systems for the Motorcycles,” International Journal of Vehicle Design, Vol.34, No. 1, pp 84-100. (SCI, EI Journal)
  12. Jian-Da Wu, Chih-Keng Chen and Jia-Hong Lin, 2004, “Active Vibration Control for Gear-Set Shaft using Adaptive Hybrid Controller,” Transactions of the Aeronautical and Astronautical Society of the Republic of China. Vol.36, No.1, pp107-113. (EI Journal).
  13. Chih-Keng Chen, Jian-Da Wu and Chen-Yu Wang, 2004, “The Fuzzy Control of the Unknown Obstacles Avoidance for the Mobile Robots,” Journal of the Chinese Society of Mechanical Engineers, Vol.25, No.1. (EI Journal).
  14. Chih-Keng Chen, Chih-Jer Lin and Liang-Chun Yao, 2004, “Input-State Linearization of a Rotary Inverted Pendulum,” Asian Journal of Control, Vol.6, No.1, pp130-135. (SCI, EI Journal)
  15. Chih-Keng Chen and Wei-Cheng ZENG, 2003, “The Iterative Learning Control for the Position Tracking of the Hydraulic Cylinder,” JSME International Journal, Series C, Vol. 46, No. 2, pp 720-726. (SCI, EI Journal)
  16. Chih-Jer Lin, Chih-Keng Chen and Kai-Sheng Li, 2003, “An Extended Sliding Mode Control for a Rotational Invert Pendulum’s Tracking Problem with Output Feedback,” Journal of the Chinese Society of Mechanical Engineers, Vol. 24, No. 3, pp 277-282. (EI Journal)
  17. Hai-Ping Lin, Chih-Keng Chen, 2003, “Accelerated Convergence Study of the Eigenvalue Problems with Limited Continuities,” Japanese Journal of Applied Physics, Vol. 42, Part 1, No. 3, pp. 1348-1354. (SCI, EI Journal)
  18. Jian-Da Wu, Chih-Keng Chen, Chun-Ying Lee and Tian-Hua Lee, 2002, “Experimental Investigation of Active Noise Controller for Internal Combustion Engine Exhaust System,” Japanese Journal of Applied Physics, Vol. 41, No. 10, pp. 6228-6235. (SCI, EI Journal)
  19. 陳志鏗, 毛彥傑, 1998, “機車防鎖定煞車系統之實作,” 大葉學報, 第七卷, 第一期, pp. 129-141.
  20. C-K. Chen and N. Sreenath, 1993, “Control of Coupled Spatial Many-body Systems with Nonholonomic Constraints,” J. of Mathematical Systems, Estimation and Control, March 1993. (SCI, EI)
Chih-Keng Chen
Journal Articles
  1. C. Y. Lee and D. Liu, 2007, “Effect of impact velocity on the indentation of thick composite laminate,” Experimental Techniques, under review.
  2. C.Y. Lee, H. C. Zhuo and C. W. Hsu, 2007, “Lateral vibration of a helical SMA spring used in semi-active suspension platform,” Journal of Sound and Vibration, under review.
  3. I. C. Cheng, E. G. Fu, C. Y. Lee and C. S. Lin, 2007, “Effect of Fluorine Anions on Anodizing Behavior of AZ91 Magnesium Alloy in Alkaline Solutions,” Journal of The Electrochemical Society, accepted. (SCI)
  4. 林宥志、李春穎、林招松，2007，”低壓電容器之陽極鋁箔腐蝕製程研究”，防蝕工程學刊，revised.
  5. C. S. Lin, C. Y. Lee, F. J. Chen, C. T. Chien, P. L. Lin and W. C. Chung, 2006, “Electrodeposition of Nickel-Phosphorus Alloy from Sulfamate Baths with Improved Current Efficiency,” Journal of The Electrochemical Society, 153(6), pp.C387-C392. (SCI)
  6. C. S. Lin, C. Y. Lee, W. C. Li, Y. S. Chen and G. N. Fang, 2006, “Formation of Phosphate/Permanganate Conversion Coating on AZ31 Magnesium Alloy,” Journal of The Electrochemical Society, 153(3), pp.B90-B96. (SCI)
  7. C. Y. Lee, R. Q. Jian, C. S. Lin and C. Y. Wen, 2006, “Simulation and Experimentation on the Contact Width and Pressure Distribution of Lip Seals,” Tribology International, 39, pp.915-920. (SCI)
  8. C. S. Lin, C. Y. Lee, T. F. Chang and T. H. Chang, 2006, “Annealing Behaviors of Electrodeposited Ni-TiO2 Composite Coatings,” Surface and Coatings Technology, 200(12-13), pp.3690-3697. (SCI)
  9. C. S. Lin, C. Y. Lee, J. H. Yang, and Y. S. Huang, 2005, “Improved Copper Microcolumn Fabricated by Localized Electrochemical Deposition,” Electrochemical and Solid-State Letters, 8(9), C125-C129. (SCI)
  10. C. S. Lin, C. Y. Lee, F. G. Chen and W. C. Lee, 2005, “Structural Evolution and Internal Stress of Nickel-Phosphorus Electrodeposits,” Journal of The Electrochemical Society, 152(6), pp.C370-C375. (SCI)
  11. 楊仁泓、黃英修、李春穎、林招松，2005，”局部電化學沈積法之一維結構製程及機械性質量測，” 材料科學與工程，第37卷第2期，pp.93-99。
  12. C. Y. Lee, K. L. Jwo, and M. W. Wu, 2003, “A Study on the Dynamic Characteristics of An ER Fluid Controlled Displacement Transmitter with Two Output Units,” Journal of Intelligent Material Systems and Structures, 14(6), pp.393-403. (SCI)
  13. C. Y. Lee, G. Z. Chao, and J. D. Wu, 2002, “Effect of Curvature on the Flow of an Electrorheological Fluid Through an Annular Duct,” The Journal of the Chinese Society of Mechanical Engineers, 23(4), pp.345-353. (EI)
  14. C. Y. Lee and C. Y. Tseng, 2002, “The Droplet Ejection of An Inkjet Mechanism Controlled by Electrorheological Fluid,” Materials and Design, 23, pp.727-739. (SCI Extended)
  15. C. Y. Lee and C. Y. Wen, 2002, “The Oscillatory Squeeze Flow of Electrorheological Fluid Considering the Inertia Effect,” Smart Materials and Structures, 11, pp.553-560. (EI, SCI Extended)
  16. J. D. Wu, C. K. Chen, C. Y. Lee and T. H. Lee, 2002, “Experimental Investigation of Active Noise Controller for Internal Combustion Engine Exhaust System,” Japanese Journal of Applied Physics, 41(10), pp.6228-6235. (SCI)
  17. C. Y. Lee and K. L. Jwo, 2001, “Experimental Study on Electro-Rheological Material with Grooved Electrode Surfaces,” Materials and Design, 22(4), pp.277-283. (SCI Extended)
  18. C. Y. Lee and W. C. Liao, 2000, “Characteristics of Electro-Rheological Fluid Valve Used in An Ink-Jet Printhead,” Smart Materials and Structures, 9(6), pp.839-846. (EI, SCI Extended)
  19. C. Y. Lee and C. C. Cheng, 2000, “Complex Moduli of Electrorheological Material under Oscillating Shear,” International Journal of Mechanical Sciences, 42(3), pp.561-573. (SCI, EI)
  20. C. Y. Lee and C. C. Huang, 1999, “Evaluation of Interlaminar Shear Stress by Strain Measurements on Laminate Surfaces,” The Chinese Journal of Mechanics, 15(3), pp.127-135. (SCI,EI)
  21. C. Y. Lee and C. C. Cheng, 1998, “Dynamic Characteristics of Sandwich Beam with Embedded Electro-Rheological Fluid,” Journal of Intelligent Material Systems and Structures, 9(1), pp.60-68. (SCI)
  22. C. Y. Lee and C. H. Shu, 1998, “Layer Reduction Technique in the Interlaminar Shear Stress Analysis of Laminated Cylindrical Shells”, The Journal of the Chinese Society of Mechanical Engineers, 19(4), pp.433-439.(EI)
  23. C. Y. Lee and J. M. Chen, 1996, “Interlaminar Shear Stress Analysis of Composite Laminate with Layer Reduction Technique”, International Journal for Numerical Methods in Engineering, 39, pp.847-865. (SCI, EI)
  24. C. Y. Lee, 1995, “Finite Element Formulation of a Sandwich Beam with Embedded Electro-Rheological Fluids”, Journal of Intelligent Material Systems and Structures, 6(5), pp.718-728. (SCI)
  25. C. Y. Lee, B. S. Thompson, M. V. Gandhi and S. B. Choi, 1994, “A Variational Formulation for the Finite Element Analysis and Control of Linkage and Robotic Systems Featuring Smart Materials Incorporating Piezoelectric Materials,” Journal of Applied Mechanisms, 1(3), pp.1-16.
  26. C. Y. Lee and D. Liu, 1993, “Nonlinear Analysis of Composite Plates Using Interlaminar Shear Stress Continuity,” Composites Engineering, 3(2), pp.151-168. (SCI, EI)
  27. D. Liu, C. Y. Lee and X. Lu, 1993, “Repairability of Impact-Induced Damage in SMC Composites,” Journal of Composite Materials, 27(13), pp.1257-1271. (EI)
  28. C. Y. Lee, D. Liu and X. Lu, 1992, “Static and Vibration Analysis of Laminated Composite Beams with an Interlaminar Shear Stress Continuity Theory,” International Journal of Numerical Methods in Engineering, 33, pp.409-424. (SCI, EI)
  29. C. Y. Lee and D. Liu, 1992, “An Interlaminar Stress Continuity Theory for Laminated Composite Analysis”, Computers & Structures, 42(1), pp.69-78. (SCI, EI)
  30. C. Y. Lee and D. Liu, 1992, “Layer Reduction Technique for Composite Laminate Analysis,” Computers & Structures, 44(6), pp.1305-1316. (SCI, EI)
  31. C. Y. Lee and D. Liu, 1992, “Interlaminar Stress Continuity Theory for Laminated Composite Analysis,” AIAA Journal, 29(11), pp.2010-2012. (SCI, EI)
  32. C. Y. Lee, M. Pfeifer, B. S. Thompson, and M. V. Gandhi, 1989, “The Characterization of Elastic Moduli and Damping Capacities of Graphite/Epoxy Composite Laminated Beams in Hygrothermal Environments,” Journal of Composite Materials, 23(8), pp.819-845. (SCI)
  33. S. B. Choi, M. V. Gandhi, B. S. Thompson, and C. Y. Lee, 1988, “An Experimental Investigation of an Articulating Robotic Manipulator with a Graphite-Epoxy Composite Arm,” Journal of Robotic Systems, 5(1), pp.73-79. (SCI, EI)
  34. C. Y. Lee, B. S. Thompson and M. V. Gandhi, 1988, “Temperature-dependent Dynamic Mechanical Properties of Polymeric Laminated Beams,” Journal of Engineering Materials and Technology, 5(1), pp.174-179. (SCI)
  35. C. K. Sung, B. S. Thompson, M. V. Gandhi and C. Y. Lee, 1988, ”A Methodology for Synthesizing Symmetric Laminated Beams with Optimal Elastodynamic Response Characteristics,” International Journal of Mechanical Science, 29(12), pp.821-830. (SCI, EI)
Chun-Ying Lee
Journal Articles
  1. S. C. Chang and H. P. Lin, “Synchronization with Particular Application to the Control of a Chaotic Electromagnetic System,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2008. (SCI) (accepted)
  2. Hai-Ping Lin, “Dynamic Responses of Beams with a Flexible Support under a Constant Speed Moving Load,” Journal of Mechanics (SCI), accepted and to be published. (NSC93-2745-E-212-006-URD)
  3. Hai-Ping Lin and S.C. Chang, “Forced Responses of Cracked Cantilever Beams Subjected to a Concentrated Moving Load,” I. Journal of Mechanical Sciences (SCI, EI), 48, pp1456-1463, 2006. (NSC 93-2745-E-212-006-URD)
  4. Hai-Ping Lin and Jian-Da Wu, “Dynamic Analysis of Planar Closed-Frame Structures,”Journal of Sound and Vibration (SCI, EI), 282(1), pp249-264, 2005. (NSC
    92-2212-E-212-021)
  5. Hai-Ping Lin and S.C. Chang, “Dynamic Analysis of Multi-span Beams with Intermediate Flexible Constraints,” Journal of Sound and Vibration (SCI, EI), 281(1), pp. 155-169, 2005.(NSC 92-2212-E-212-021)
  6. S.C. Chang and Hai-Ping Lin, “Non-linear Dynamics and Chaos Control for an Electromagnetic System,” Journal of Sound and Vibration (SCI, EI), 279(2), pp. 327-344,2005.
  7. Jian-Da Wu, Hai-Ping Lin and Ran-Jen Hung, “Design of a Variable Step-size Filtering Algorithm for Acoustic Feedback Cancellation in Audio Systems,” Fluctuation and Noise Letters (SCI), pp. 387-395, Vol. 5, No. 3, 2005.
  8. Hai-Ping Lin, “Direct and Inverse Methods on Free Vibration Analysis of Simply Supported Beams with a Crack,” Engineering Structures (SCI, EI), 26(4), pp.427-436, 2004.(NSC 92-2212-E-212-021)
  9. Jian-Da Wu, Hai-Ping Lin and Tian-Hua Lee, “Implementation of Adaptive Harmonic Noise Controller for Engine Exhaust System with Frequency Multiplier Circuit,”International Journal of Vehicle Design (SCI, EI), 35(3), pp. 260-273, 2004. (NSC90-2745-P-212-003)
  10. S.C. Chang and Hai-Ping Lin, “Chaos Attitude Motion and Chaos Control in an Automotive Wiper System,” Journal of Solid and Structures (SCI, EI), 41(13), pp.
    3491-3504, 2004. (NSC 91-2745-P-212-003)
  11. H.P. Lin and J. Ro, “Vibration Analysis of Planar Serial-Frame Structures,” Journal of Sound and Vibration (SCI, EI), 262(5), pp. 1113-1131, 2003. (NSC 90-2745-P-212-003)
  12. Hai-Ping Lin, “Crack Identification of a Beam on Measurements of Natural Frequencies,”Japanese Journal of Applied Physics (SCI, EI), 42(3), Part 1, pp.1341-1347, 2003. (NSC89-2745-P-212-003)
  13. Hai-Ping Lin and Chih-Keng Chen, “Accelerated Convergence Study of the Eigenvalue Problems with Limited Continuities,” Japanese Journal of Applied Physics (SCI, EI), 42(3),Part 1, pp.1348-1354, 2003.
  14. H.P. Lin, S.C. Chang and J.D. Wu, “Beam Vibrations with an Arbitrary Number of Cracks,” Journal of Sound and Vibration (SCI, EI), 258(5), pp. 987-999, 2002. (NSC89-2745-P-212-003)
  15. H.P. Lin and N.C. Perkins, “Free Vibration of Complex Cable/Mass System: Theory and Experiment,” Journal of Sound and Vibration (SCI, EI), 179, pp.131-149, 1995.
Hai-Ping Lin
Journal Articles
  1. Hsieh, W. H. and Yeh, C. L., “Approach to the Measurement of Burning-Surface Temperature of Boron,” Journal of Propulsion and Power, Vol. 9, No. 1, pp. 157-160, 1993. (SCI, EI)
  2. Yeh, C. L. and Kuo, K. K., “Ignition and Combustion of Boron Particles,” Progress in Energy and Combustion Science, Vol. 22, No. 6, pp. 511-541, 1996. (SCI, EI)
  3. Yeh, C. L., Kuo, K. K., Klimkiewicz, M., and Brown, P. W., “Environmental Scanning Electron Microscopy Studies of Diffusion Mechanism of Boron Particle Combustion,” Scanning – The Journal of Scanning Microscopies, Vol. 19, No. 2, pp. 114-118, 1997. (SCI, EI)
  4. Yeh, C. L., Mench, M. M., and Kuo, K. K., “An Investigation on Flame-Spreading Process of Thin Film Mg/PTFE/Mg Pyrotechnics,” Combustion Science and Technology, Vol. 126, pp. 271-289, 1997. (SCI, EI)
  5. Yeh, C. L., Johnson, D. K., and Kuo, K. K., “Experimental Study of Flame-Spreading Processes over Thin Aluminum Sheets,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres, Vol. 8, pp. 283-296, 1997. (EI)
  6. Mench, M. M., Kuo, K. K., Yeh, C. L., and Lu, Y. C., “Comparison of Thermal Behavior of Regular and Ultra-fine Aluminum Powders (Alex) Made from Plasma Explosion Process,” Combustion Science and Technology, Vol. 135, pp. 269-292, 1998. (SCI, EI)
  7. Yeh, C. L., Johnson, D. K., Kuo, K. K., and Mench, M. M., “Flame-Spreading Processes over Thin Aluminum Sheets in Oxygen-Enriched Environments,” Combustion Science and Technology, Vol. 137, pp. 195-216, 1998. (SCI, EI)
  8. Yeh, C. L., Zhao, E., and Ma, H. K., “Combustion Synthesis of SiO2 Thin Film on the Aluminum Plate,” Journal of Thermal Science, Vol. 10, No. 1, pp. 92-97, 2001. 國科會計畫編號：NSC 89-2212-E-212-005
  9. Yeh, C. L., Wen, C. Y., Chen, Y. F., Yeh, S. H., and Wu, C. H., “An Experimental Investigation of Thermal Contact Conductance across Bolted Joints,” Experimental Thermal and Fluid Science, Vol. 25, No. 6, pp. 349-357, 2001. (SCI, EI) 國科會(太空計畫室)計畫編號：NSC 89-NSPO(A)-PC-FD11-01
  10. Yeh, C. L., Zhao, E., and Ma, H. K., “An Experimental Investigation of Combustion Synthesis of Silicon Dioxide (SiO2) Particles in Premixed Flames,” Combustion Science and Technology, Vol. 173, pp. 25-46, 2001. (SCI, EI) 國科會計畫編號：NSC 89-2212-E-212-005; NSC 89-2212-E-212-022
  11. Yeh, C. L., Chen, Y. F., Wen, C. Y., and Li, K. T., “Measurement of Thermal Contact Resistance of Aluminum Honeycombs,” Experimental Thermal and Fluid Science, Vol. 27, No. 3, pp. 271-281, March 2003. (SCI, EI) 國科會(太空計畫室)計畫編號：NSC 90-NSPO(A)-PC-FD11-01
  12. Yeh, C. L., Chen, Y. F., Wen, C. Y., and Li, K. T., “Thermal Contact Resistance of Aluminum Honeycombs across Bolted Joints,” Experimental Heat Transfer, Vol. 16, No. 3, pp. 211-226, July 2003. (SCI, EI) 國科會(太空計畫室)計畫編號：NSC 90-NSPO(A)-PC-FD11-01
  13. Ma, H. K., Zhao, E., Yeh, C. L., and Chung, K. M., “The Formation of Nano-size SiO2 Thin Film on an Aluminum Plate with Hexamethyldisilazane (HMDSA) and Hexamethyldisiloxane (HMDSO),” Journal of Thermal Science, Vol. 12, No. 1, pp. 89-96, 2003. (EI) 國科會計畫編號：NSC 89-2212-E-212-005; NSC 89-2212-E-212-022
  14. Yeh, C. L., Zhao, E., and Ma, H. K., “Gas-Phase Combustion Synthesis of SiO2 Nanoparticles from Hexamethyldisiloxane,” Transactions of The Aeronautical and Astronautical Society of The Republic of China, Vol. 35, No. 3, pp. 249-255, Sept. 2003. (EI)國科會計畫編號：NSC 89-2212-E-212-005; NSC 89-2212-E-212-022 
  15. Yeh, C. L. and Lin, C. T., “Thermal Contact Resistance Correlation for Metals across Bolted Joints,” International Communications in Heat and Mass Transfer, Vol. 30, No. 7, pp. 987-996, Nov. 2003. (SCI, EI)
  16. Yeh, C. L. and Chuang, H. C., “Combustion Characteristics of SHS Process of Titanium Nitride with TiN Dilution,” Ceramics International, Vol. 30, No. 5, pp. 705-714, June 2004. (SCI, EI; Impact Factor: 1.040) 國科會計畫編號：NSC 90-2212-E-212-015 and NSC 91-2212-E-212-020
  17. Yeh, C. L. and Chuang, H. C., “Experimental Studies on Self-propagating Combustion Synthesis of Niobium Nitride,” Ceramics International, Vol. 30, No. 5, pp. 733-743, June 2004. (SCI, EI; Impact Factor: 1.040) 國科會計畫編號：NSC 91-2212-E-212-020 and NSC 92-2212-E-212-003
  18. Yeh, C. L., Yeh, S. H, and Ma, H. K., “Flame Synthesis of Titania Particles from Titanium Tetraisopropoxide in Premixed Flames,” Powder Technology, Vol. 145, No. 1, pp. 1-9, July 2004. (SCI, EI; Impact Factor: 0.986) 國科會計畫編號：NSC 89-2212-E-212-022
  19. Yeh, C. L. and Sung, W. Y., “Synthesis of NiTi Intermetallics by Self-propagating Combustion,” Journal of Alloys and Compounds, Vol. 376, No. 1-2, pp. 79-88, August 2004. (SCI, EI; Impact Factor: 1.562)國科會計畫編號： NSC 92-2212-E-212-015
  20. Yeh, C. L., Liu, E. W., and Chang, Y. C., “Effect of Preheating on Synthesis of Tantalum Nitride by Self-propagating Combustion,” Journal of the European Ceramic Society, Vol. 24, No. 15-16, pp. 3807-3815, Dec. 2004. (SCI, EI; Impact Factor: 1.483) 國科會計畫編號：NSC 91-2212-E-212-020 and NSC 92-2212-E-212-003
  21. Yeh, C. L. and Sung, W. Y., “Combustion Synthesis of Ni3Al Intermetallic Compound in Self-propagating Mode,” Journal of Alloys and Compounds, Vol. 384, No. 1-2, pp. 181-191, Dec. 2004. (SCI, EI; Impact Factor: 1.562) 國科會計畫編號：NSC 92-2212-E-212-015
  22. Wen, C. Y., Yeh, C. L., Wang, M. J. and Lin, C. Y., “On the Drag of Two-Dimensional Flow about a Circular Cylinder,” Physics of Fluids, Vol. 16, No. 10, pp. 3828-3831, 2004. (SCI, EI)
  23. Yeh, C. L., Chuang, H. C., Liu, E. W., and Chang, Y. C., “Effects of Dilution and Preheating on SHS of Vanadium Nitride,” Ceramics International, Vol. 31, No. 1, pp. 95-104, Jan. 2005. (SCI, EI; Impact Factor: 1.040; Ranking: 6/25) 國科會計畫編號：NSC 91-2212-E-212-020 and NSC 92-2212-E-212-003
  24. Yeh, C. L. and Yeh, C. C., “Preparation of CoAl Intermetallic Compound by Combustion Synthesis in Self-propagating Mode,” Journal of Alloys and Compounds, Vol. 388, No. 2, pp. 241-249, Feb. 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  25. Yeh, C. L. and Sung, W. Y., “Combustion Synthesis of Ni3Al by SHS with Boron Additions,” Journal of Alloys and Compounds, Vol. 390, No. 1-2, pp. 74-81, March 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  26. Yeh, C. L. and Chen, Y. D., “Direct Formation of Titanium Carbonitrides by SHS in Nitrogen,” Ceramics International, Vol. 31, No. 5, pp. 719-729, May 2005. (SCI, EI; Impact Factor: 1.040; Ranking: 6/25) 國科會計畫編號：NSC 93-2212-E-212-008
  27. Yeh, C. L. and Hsu, C. C., “An Experimental Study on Ti5Si3 Formation by Combustion Synthesis in Self-propagating Mode,” Journal of Alloys and Compounds, Vol. 395, No. 1-2, pp. 53-58, May 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  28. Yeh, C. L. and Yeh, C. C., “Preparation of CoTi Intermetallics by Self-propagating Combustion Synthesis,” Journal of Alloys and Compounds, Vol. 396, No. 1-2, pp. 228-232, June 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  29. Yeh, C. L., Su, S. H., and Chang, H. Y., “Effects of TiC Addition on Combustion Synthesis of NiAl in SHS Mode,” Journal of Alloys and Compounds, Vol. 398, No. 1-2, pp. 85-93, August 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  30. Yeh, C. L. and Chen, Y. D., “Synthesis of Niobium Carbonitride by Self-propagating Combustion of Nb-C System in Nitrogen,” Ceramics International, Vol. 31, No. 8, pp. 1031-1039, August 2005. (SCI, EI; Impact Factor: 1.040; Ranking: 6/25) 國科會計畫編號：NSC 93-2212-E-212-008
  31. Yeh, C. L. and Chen, W. H., “Preparation of Nb5Si3 Intermetallic and Nb5Si3/Nb Composite by Self-propagating High-temperature Synthesis,” Journal of Alloys and Compounds, Vol. 402, No. 1-2, pp. 118-123, Oct. 2005. (SCI, EI; Impact Factor: 1.562; Ranking: 8/71) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  32. Yeh, C. L. and Su, S. H., “In situ Formation of TiAl-TiB2  Composite by SHS,” Journal of Alloys and Compounds, Vol. 407, No. 1-2, pp. 150-156, Jan. 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  33. Yeh, C. L. and Liu, E. W., “Combustion Synthesis of Tantalum Carbides TaC and Ta2C,” Journal of Alloys and Compounds, Vol. 415, No. 1-2, pp. 66-72, May 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  34. Yeh, C. L. and Teng, G. S., “Use of BN as a Reactant in Combustion Synthesis of TiN-TiB2 Composites under Nitrogen Pressure,” Journal of Alloys and Compounds, Vol. 417, No. 1-2, pp. 109-115, June 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 94-2212-E-212-018
  35. Yeh, C. L. and Liu, E. W., “Preparation of Tantalum Carbonitride by Self-propagating High-temperature Synthesis of Ta-C System in Nitrogen,” Ceramics International, Vol. 32, No. 6, pp. 653-658, June 2006. (SCI, EI; Impact Factor: 0.702; Ranking: 8/28) 國科會計畫編號：NSC 93-2212-E-212-008
  36. Yeh, C. L. and Chen, W. H., “Preparation of Niobium Borides NbB and NbB2 by Self-propagating Combustion Synthesis,” Journal of Alloys and Compounds, Vol. 420, No. 1-2, pp. 111-116, August 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 94-2212-E-212-018
  37. Yeh, C. L. and Chen, W. H., “A Comparative Study on Combustion Synthesis of Nb-B Compounds,” Journal of Alloys and Compounds, Vol. 422, No. 1-2, pp. 78-85, Sept. 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 94-2212-E-212-018
  38. Yeh, C. L. and Teng, G. S., “Combustion Synthesis of TiN-TiB2  Composites in Ti/BN/N2 and Ti/BN/B Reaction Systems,” Journal of Alloys and Compounds, Vol. 424, No. 1-2, pp. 152-158, Nov. 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 94-2212-E-212-018
  39. Yeh, C. L. and Chen, W. H., “A Comparative Study on Combustion Synthesis of Nb-Si Compounds,” Journal of Alloys and Compounds, Vol. 425, No. 1-2, pp. 216-222, Nov. 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  40. Yeh, C. L. and Liu, E. W., “Combustion Synthesis of Chromium Nitrides by SHS of Cr Powder Compacts under Nitrogen Pressures,” Journal of Alloys and Compounds, Vol. 426, No. 1-2, pp. 131-135, Dec. 2006. (SCI, EI; Impact Factor: 1.370; Ranking: 8/67)國科會計畫編號：NSC 94-2212-E-212-018
  41. Yeh, C. L. and Teng, G. S., “Use of Si3N4 as a Reactant in Preparation of TiN-Ti5Si3 Composites by Solid-state SHS Reactions,” Journal of Alloys and Compounds, Vol. 429, No. 1-2, pp. 126-132, Feb. 2007. (SCI, EI; Impact Factor: 1.250; Ranking: 8/65) 國科會計畫編號：NSC 94-2212-E-212-018
  42.  Yeh, C. L. and Chen, Y. D., “Combustion Synthesis of Vanadium Carbonitride from V-C Powder Compacts under Nitrogen Pressure,” Ceramics International, Vol. 33, No. 3, pp. 365-371, April 2007. (SCI, EI; Impact Factor: 1.128; Ranking: 6/26) 國科會計畫編號：NSC 93-2212-E-212-008
  43. Yeh, C. L., Chen, W. H., and Hsu, C. C., “Formation of Titanium Silicides Ti5Si3 and TiSi2 by Self-propagating Combustion Synthesis,” Journal of Alloys and Compounds, Vol. 432, No. 1-2, pp. 90-95, April 2007. (SCI, EI; Impact Factor: 1.250; Ranking: 8/65) 國科會計畫編號：NSC 92-2212-E-212-015 and NSC 93-2212-E-212-002
  44. Yeh, C. L. and Liu, E. W., “Effects of Si3N4 Addition on Formation of Aluminum Nitride by Self-propagating Combustion Synthesis,” Journal of Alloys and Compounds, Vol. 433, No. 1-2, pp. 147-153, May 2007. (SCI, EI; Impact Factor: 1.250; Ranking: 8/65) 國科會計畫編號：NSC 94-2212-E-212-018 and NSC 95-2221-E-212-040
  45. Yeh, C. L. and Chen, W. H., “Combustion Synthesis of MoSi2and MoSi2-Mo5Si3 Composites,” Journal of Alloys and Compounds, Vol. 438, No. 1-2, pp. 165-170, July 2007 (SCI, EI; Impact Factor: 1.250; Ranking: 8/65)  國科會計畫編號：NSC 95-2221-E-212-053-MY2
  46. Yeh, C. L. and Chen, W. H., “An Experimental Investigation on Combustion Synthesis of Transition Metal Silicides V5Si3, Nb5Si3 and Ta5Si3,” Journal of Alloys and Compounds, Vol. 439, No. 1-2, pp. 59-66, July 2007. (SCI, EI; Impact Factor: 1.250; Ranking: 8/65) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
  47. Yeh, C. L. and Hsu, W. S., “Preparation of MoB and MoB-MoSi2 Composites by Combustion Synthesis in SHS Mode,” Journal of Alloys and Compounds, Vol. 440, No. 1-2, pp. 193-198, August 2007. (SCI, EI; Impact Factor: 1.250; Ranking: 8/65) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
  48. Yeh, C. L. and Wang, H. J., “A Comparative Study on Combustion Synthesis of Ta-Si Compounds,” Intermetallics, Vol. 15, pp. 1277-1284, Oct. 2007. (SCI, EI; Impact Factor: 1.943; Ranking: 4/65) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
  49. Yeh, C. L., Wang, H. J., and Chen, W. H., “A Comparative Study on Combustion Synthesis of Ti-Si Compounds,” Journal of Alloys and Compounds, 2007. in press (SCI, EI; Impact Factor: 1.250) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
  50. Yeh, C. L. and Hsu, W. S., “Preparation of Molybdenum Borides by Combustion Synthesis Involving Solid-phase Displacement Reactions,” Journal of Alloys and Compounds, 2007. in press (SCI, EI; Impact Factor: 1.250)國科會計畫編號：NSC 95-2221-E-212-053-MY2
  51. Yeh, C. L. and Li, R. F., “Formation of TiAl-Ti5Si3 and TiAl-Al2O3 in situ composites by combustion synthesis,” Intermetallics, 2007. in press (SCI, EI; Impact Factor: 1.943) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
  52. Yeh, C. L. and Chen, Y. L., “Combustion Synthesis of TiC-TiB2 Composites,” Journal of Alloys and Compounds, 2007. in press (SCI, EI; Impact Factor: 1.250) 國科會計畫編號：NSC 95-2221-E-212-040
  53. Yeh, C. L. and Li, R. F., “Formation of TiB2-Al2O3 Composites by Combustion Synthesis Involving Thermite Reactions,” submitted to Journal of Alloys and Compounds, 2007. (SCI, EI; Impact Factor: 1.250) 國科會計畫編號：NSC 95-2221-E-212-053-MY2
Chun-Liang Yeh
Journal Articles
國際論文
 
  1. Chang, Yih-Fang, and Chen, Bor-Sen," The VSS Controller Design and Implementation for the Constant Turning Force Adaptive Control System," Int. J.Mach. Tools Manufact.(SCI), Vol.28, No.4,pp.373-387, 1988.
  2. Chen, Bor-Sen, and Chang, Yih-Fang," Constant Turning Force Adaptive Controller Design," ASME, J. Engineering for Industry (SCI), Vol.111, pp.125-132, May 1989.
  3. Chen, Bor-Sen, and Chang, Yih-Fang," Robust PI Controller Design for a Constant Turning Force System," Int. J. Mach. Tools Manufact. (SCI), Vol.31,No.3, pp.257-272, 1991.
  4. Chang, Yih-Fang, and Chen, Bor-Sen," A Robust Performance Variable Structure PI/P Control Design for High Precise Positioning Control System," Int. J. Mach. Tools Manufact. (SCI), Vol.35, No.12, pp.1649-1667, Feb. 1995. (85學年度國科會甲種獎勵代表作)
  5. Fuh, K. H., Chen, C. T. and Chang, Y. F., "Design and Implementation for the Maximum Metal Removal Rate Control System," Journal of Material Processing Technology (SCI,EI), Vol. 57, No. 3-4, pp. 351-359, Feb. 1996.
  6. Chang, Yih-Fang, ” VSS Controller Design for Gap Control of EDM”, JSME International Journal series (c) (SCI), Vol.45, No.3, pp.712-721, Sept.2002.(NSC89-2212-E-212-032)
  7. Chang, Yih-Fang, ”Buffered DDA Command Generation in a CNC”, Control Engineering Practice (SCI), Vol.11, No. 7, pp. 797 – 804, July 2003. (NSC89-2212-E-212-015) (升等教授代表作)
  8. Chang, Yih-Fang and Liao, Yao-Ji, “FPGA-based Robust Ignition Delay Control on EDM,” Journal of Chinese Society of Mechanical Engineers (EI), Vol. 24,No. 6, pp. 629-639, Dec. 2003. (NSC91-2212-E-212-015)
  9. Chang, Yih-Fang, “Mixed H2/H∞ Optimization Approach to Gap Control on EDM ,” Control Engineering Practice (SCI), Vol.13, No. 1, pp. 95 – 104, January 2005. (NSC90-2212-E-212-024)
  10. Chang, Yih-Fang, “The Design and Implementation of Linear Jerk Filter of a CNC”, Control Engineering Practice (SCI), Vol.13, No. 5, pp. 567 – 576, May 2005. (NSC89-2212-E-212-015)
  11. Chang, Yih-Fang and Chiu, Zhi-Hao,” Electrode Wear Compensation of Electric Discharge Scanning Process using Gap Control”, Vol.14, No. 10, pp.1121 – 1139, MECHATRONICS (SCI), Dec. 2004. (NSC89-2212-E-212-015)
  12. Chang, Yih-Fang and Hong, Rong-Chi, “Parametric curve machining of a CNC milling EDM,” International Journal of Machine Tools and Manufacture (SCI),Vol. 45, No. 7, pp. 941 –948, June, 2005. (NSC92-2212-E-212-007)
  13. Chang, Yih-Fang, Jhao-Tong Chen and Jian-Ching Li, " Monitor and control of discharge energy during EDMing," Asian Journal of Control (SCI), Vol. 7, No. 1,pp. 38 –49, March 2005. (NSC92-2212-E-212-007)
  14. Chang, Yih-Fang, " Generating commands for parametric curve motion using buffered DDA," JSME International Journal series (c) (SCI), Vol.48, No.4,pp.785-793, Dec. 2005. (NSC91-2212-E-212-015)
  15. Chang, Yih-Fang, " DSP-based ignition delay control of an electro-discharge machining process," Intelligent Automation and Soft Computing (SCI), Vol.13,No.2, pp. 139 –151, 2007. (NSC 88-2212-E-212-010)
  16. Chang, Yih-Fang, “Robust PI Controller Design for EDM,” 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON'07) (EI), TPC1-6 Adaptive Nonlinear Systems, pp.651-658, Nov. 5-8, 2007, Taipei, Taiwan. (NSC 90-2212-E-212-024) (IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS 屬於EI論文)
國內論文
 
  1. 張義芳,陳博現,"以 VSS 法設計固定車削力適應控制器," 大同學報, pp.153-163, 75年11月.
  2. 張義芳," 放電加工機伺服進給控制的改進---輸入飽和值自調裝置," 模具工業,pp.33-42, 82年㆔月.
  3. 張義芳,邱志浩,”高速創成放電加工伺服控制研究,” 機械月刊,第26卷第8期,pp.400-407，2000。
  4. 張義芳，李健青、麥朝創、粘永峰,” 放電加工高頻分析及電弧偵測研究,” 機械工業,第229期，pp.192-200，2002/4。
  5. 張義芳，林廷鋒,” 刀具壽命預測及斷刀偵測為基礎之印刷電路板鑽孔機自動換刀策略研究,”大葉學報第十二卷第一期，pp.73-83，2003, 6 月。
  6. Chang, Yih-Fang, Shin-Seng Yang, and Yung-Feng Nien,” Adaptive Control of Operating Parameters of EDM’ing”, Journal of Technology, Vol.19, No.2, pp.179-186, 2004,6月(技術學刊以英文刊出).
  7. 張義芳,石興銓,粘永峰,”放電加工之模糊控制,” 大葉學報第十三卷第一期6月,pp.57-66，2004。
  8. 張義芳，陳韋良,”光碟機聚焦控制器參數設計之自動化,” 科學與工程技術期刊(原大葉學報) Vol.1, No.2, pp. 47-56, Sep. 2005。
  9. 徐一吉,張文洲,張義芳,”加減速對CNC工具機循跡精度之影響,” 機械月刊,第32卷第6期, pp.文36-文44，2006年6月第371期。
Yih-Fang Chang
Journal Articles
  1. T. L. Teng and Kai-Wen Zheng, May. 2008, Optimal Design of Road Bicycle Handlebar. (Submitted to the Chinese Journal of Mechanical Engineering, in review) [EI]
  2. T. L. Teng and T. H. Nguyen, Feb. 2008, Design of Pedestrian Friendliness Vehicle Bumper. (Submitted to Vehicle System Dynamics, in review) [SCI, EI]
  3. T. L. Teng, Trung-Kien Le and Van-Luc Ngo, Apr. 2008, Injuries Analysis of Pedestrian in Collisions Using Pedestrian Deformable Model. (Submitted to International Journal of Automotive Technology, in review) [SCI, EI]
  4. T. L. Teng, and Qui-An Lei, Mar. 2008, The Establishment and Analysis of Numerical Model of Rollover Test. (Submitted to Journal of vehicle engineering, in review)
  5. T. L. Teng and Ming-Jia Zhou, Mar. 2008, TheOptimal Design of the Frame of Treadmill, (Submitted to Journal of Science and Engineering Technology, in review)
  6. T. L. Teng and T. H. Nguyen, Jan. 2008, Assessment of Pedestrian Friendliness of a Vehicle Using Subsystem Impact Tests. (Submitted to International Journal of Automotive Technology, in review) [SCI, EI]
  7. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, Oct. 2006, Penetration resistance of steel fiber reinforced concrete containment structure to high velocity projectile. (Submitted to Computers and Concrete, in review) [SCI, EI]
  8. T. L. Teng and C. H. Wu, Jan. 2008, The Numerical Simulation of Side Impact Crashes. (Submitted to the Journal of Mechanical Science and Technology, in review) [SCI, EI]
  9. T. L. Teng, Trung-Kien Le and Van-Luc Ngo, Apr. 2008, Injuries Analysis of Pedestrian in Collisions Using Pedestrian Deformable Model, International Journal of Automotive Technology. (Accepted for publication, in press) [SCI, EI]
  10. T. L. Teng and Trung-Kien Le, May. 2008, Development and Validation of Pedestrian Deformable Finite Element Model, Journal of Mechanical Science and Technology. (Accepted for publication, in press) [SCI, EI]
  11. T. L. Teng, F. A. Chang, Y. S. Liu and C. P. Peng, 2008, Analysis of Dynamic Response of Vehicle Occupant in Frontal Crash Using Multibody Dynamics Method,Mathematical and Computer Modelling. (Accepted for publication, in press) [SCI, EI]
  12. T. L. Teng and T. H. Nguyen, 2008, Crashworthiness Evaluation of Side-Door Beam of Vehicle, Technische Mechanik, Vol.28, No.3, pp.268~278.
  13. T. L. Teng and P. H. Chang, 2008, Numerical and Experimental Investigations on the Fatigue Life Evaluation of the Butt-Welded Joints, Metals and Materials International, Vol.14, No.3, pp.361~372. [SCI, EI]
  14. T. L. Teng and T. H. Nguyen, 2008, Development and Validation of FE Models of Impactor for Pedestrian Testing, Journal of Mechanical Science and Technology, Vol.22, No.9, pp.1660~1667. [SCI, EI]
  15. T. L. Teng, and D. A. Fung, 2008, Study of Frontal Vehicle Crash Pulses,Journal of vehicle engineering, Vol.5, pp.35~53.
  16. T. L.Teng, T. M. Shih and C. C. Lu, Oct. 2008, Effect of Design Parameters on the Anti-penetration Properties of Space Armo, Structural Engineering and Mechanics, an International Journal. Vol.28, No.6, pp.715~725. [SCI, EI]
  17. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2008, Development and validation numerical model of steel fiber reinforced concrete subject to high velocity impact, Computational Materials Sciences, Vol. 42, No.1, pp. 90~99. [SCI, EI]
  18.  T. L. Teng, Y. A. Chu, F. A. Chang, D. S. Cheng and B. C. Shen, 2007, Development and Comparison Analysis Methodology of Steel Fiber Reinforced Concrete Structure, Journal of C. C. I. T., Vol. 35, No.2. pp.1~11.[EI]
  19. T. L. Teng, Y. A. Chu, F. A. Chang, D. S. Cheng and B. C. Shen, 2007, Effect of Liners’ Design Parameters on the Penetration Properties of Explosively Formed Projectile, J. of Explosives and Propellants, Vol. 23, No.1. pp.25~42.
  20. T. L. Teng, F. A. Chang, Y. S. Liu and C. P. Peng, 2007, Analysis of Dynamic Response of Vehicle Occupant in Frontal Crash Using Multibody Dynamics Method, Mathematical and Computer Modelling. (Accepted for publication, in press) [SCI, EI]
  21. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2007, Development and validation numerical model of steel fiber reinforced concrete subject to high velocity impact, Computational Materials Sciences. (Accepted for publication, in press) [SCI, EI]
  22. T. L. Teng, H. W. Lan, S. M. Yang and C. H. Wu, 2007, Comparative Studies of Finite Element Model of Frontal Impact Dummy, Information Technology Journal, Vol.6, No.5, pp.711~717. [EI]
  23. T. L. Teng, K. C. Chang and C. H. Wu, 2007, Development and Validation of Side-Impact Crash and Sled Testing Finite Element Models, Vehicle System Dynamics, Vol.45, No.10, pp.925-937. [SCI, EI]
  24. T. L. Teng, C. L. Chuang and S. W. Wang, 2007, The Establishment of EuroSID Numerical Model, Journal of Science and Engineering Technology,Vol.3, No.3, pp.1-11.
  25. T. L. Teng, W. Y. Tsai and S. W. Wang, 2007, The Development and Analysis of Curtain Airbag Numerical Mode, the Journal of vehicle engineering, Vol.4, pp.37~54.
  26. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2007, Design and Implementation of High Velocity Projectile Generator, Combustion, Explosion, and Shock Waves, Vol.43, N0.2, pp.123-131. [SCI, EI]
  27. T. L. Teng, and K. T. Chou, 2007, Design and Implementation of Pressure Measurement System for Pressure Garments, Information Technology Journal,Vol. 6, No.3, pp.359~362. [EI]
  28. T. L. Teng, and D. A. Fung, 2007, Study of Frontal Vehicle Crash Pulses,(Submitted to the Journal of vehicle engineering, in review)
  29. T. L. Teng and Trung-Kien Le, 2007, Development and Validation of Pedestrian Deformable Finite Element Model. (Submitted to the Proceedings of the Institution of Mechanical Engineers Part D, Journal of Automobile Engineering, in review) [SCI, EI]
  30. T. L. Teng and Chien-Tao Pan, 2007, Crashworthiness Evaluation of Side-Door Beam of Vehicle. (Submitted to the Proceedings of the Institution of Mechanical Engineers Part D, Journal of Automobile Engineering, in review) [SCI, EI]
  31. T. L. Teng and T. H. Nguyen, 2007, Design of Pedestrian Friendliness Vehicle Bumper. (Submitted to the International Journal of Vehicle Design, in review)[SCI, EI]
  32. T. L. Teng and T. H. Nguyen, 2007, Assessment of Pedestrian Friendliness of a Vehicle Using Subsystem Impact Tests. (Submitted to Information Technology Journal, in review) [EI]
  33. T. L. Teng and T. H. Nguyen, 2007, Development and Validation of FE Models of Impactor for Pedestrian Testing. (Submitted to the Journal of Mechanical Science and Technology, in review) [SCI, EI]
  34. T. L. Teng and P. H. Chang, 2007, Numerical and Experimental Investigations on the Fatigue Life Evaulation of the Butt-Welded Joints. (Submitted to the Metals and Materials International, in review) [SCI,EI]
  35. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2007, Penetration resistance of steel fiber reinforced concrete containment structure to high velocity projectile. (Submitted to Computers and Concrete, in review) [SCI,EI]
  36. T. L.Teng, T. M. Shih and C. C. Lu, 2007, Effect of Design Parameters on the Anti-penetration Properties of Space Armor. (Submitted to Structural Engineering and Mechanics, an International Journal., in review) [SCI, EI]
  37. T. L. Teng and C. H. Wu, 2007, The Numerical Simulation of Side Impact Crashes. (Submitted to the Information Technology Journal, in review) [EI]
  38. T. L. Teng, F. A. Chang, Y. S. Liu and C. P. Peng, 2006, Analysis of Human Body Response to Vibration Using Multibody Dynamics Method, Proceedings of the Institution of Mechanical Engineers, Part K, Journal of Multi-body Dynamics, Vol.220, No.3, pp.191~202. [SCI, EI]
  39. T. L. Teng, Y. C. Wu, P. H. Chang, K. C. Chiang and C. F. Chiang, 2006,Design and Analysis of the Interface Structures of Weapon System on Armored Vehicle, Journal of C. C. I. T., Vol. 35, No.1, pp.43-52. [EI]
  40. T. L. Teng, C. H. Wu and S. W. Wang, 2006, The Injury Analysis of Occupant in Side Impact Collisions, Journal of Science and Engineering Technology.Vol.3, No.1, pp.33-41.
  41. T. L. Teng, and K. T. Chou, 2006, The Measurement and Analysis of Pressure Generated by Burn Garment, J. of Medical and Biological Engineering. Vol.26,No.4. pp.155~159.[EI]
  42. T. L. Teng, C. H. Wu and S. W. Wang, 2006, The Study of Numerical Model for Side Impact Test, Journal of vehicle engineering, Vol.3, No.3, pp.1~15.
  43. T. L. Teng, C. M. Yu and Y. Y. Wu, 2005, Optimal Design of Filament Wound Composite Pressure Vessels, Mechanics of Composite Materials, Vol.41, No.4, pp.489~498. [SCI, EI]
  44. T. L. Teng and P. H. Chang, 2005, Analysis of Fatigue damage and Prediction of Life for Welded Joints, Transaction of the Aeronautical and Astronautical Society of the Republic of China, Vol.37, No.4, pp.301~316. [EI]
  45. T. L. Teng and C. H. Liu, 2005, The Safety Assessment of Railway Vehicle Running on a Curved Track, Journal of traffic science, Vol. 5, No.1,p.111~129.
  46. T. L. Teng and K. J. Lee, 2005, Development of Estimation Software for the Vehicle’s Velocity in Accident, Journal of traffic science, Vol. 5, No.1,p.147~164.
  47. T. L. Teng and K. J. Lee, 2005, The Estimation of Stiffness Coefficients on Damage Algorithms, Journal of vehicle engineering, Vol.2, pp.65-80.
  48. T. L. Teng and P. H. Chang, 2005, Fatigue Life Prediction of Gun Mount Assembly for Automatic Gun, Journal of C. C. I. T. , Vol.33, No.2,pp.137-154. [EI]
  49. T. L. Teng, Y. A. Chu, F. A. Chang and B. C. Shen, 2005, Perforation Resistance of Reinforced Concrete Containment Structures, the Annals of Nuclear Energy, Vol.32, pp.281-298. [SCI, EI]
  50. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2005, Numerical Analysis of Oblique Impact on Reinforced Concrete, Journal of Cement and Concrete Composites. Vol.27, pp.481-492. [SCI, EI]
  51. C. C. Liang, M. F. Yang, P. W. Wu and T. L. Teng, 2005, Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application, Ocean Engineering, Vol.32, pp.441-468.[SCI, EI]
  52. T. L. Teng and C. C. Wu, 2004, Human Injuries as a Reconstruction Parameter in Traffic Accident, Journal of Technology. Vol.19, No.3,pp.231-238.
  53. T. L. Teng, F. A. Chang, C. P. Peng and B. W. Yang, 2004, The Study of Head and Neck Injury in Traffic Accidents, Journal of Applied Sciences,Vol.4, No.3, pp449-455.
  54. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Calculating the Elastic Moduli of Steel Fiber Reinforced Concrete using a Dedicated Empirical Formula, Journal of Computational Materials Science, Vo.31,pp.337-346. [SCI, EI]
  55. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Simulation Model for Impact on Reinforced Concrete, Joural Cement and Concrete Research,Vol.34, pp.2067-2077. [SCI, EI]
  56. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2004, Application of the Equivalent Inclusion Method on Material Strength Evaluation and Structural Analysis for Steel-Fiber Reinforced Concrete, Journal of C. C. I. T., Vol.33,No.1, pp.107-117. [EI]
  57. T. L. Teng, C. C. Liang, Y. Y. Wu and H. W. Chen, 2004, The Effect of Design Parameters on the Slippage Tendency in Domes with Plane Filament-Winding, Transaction of the Aeronautical and Astronautical Society of the Republic of China,Vol.36, No.2, pp151-152. [EI]
  58. T. L. Teng, T. M. Shis and C. C. Wu, 2004, A Finite Element Model for a Frontal Impact Dummy, Journal of Technology, Vol.19, No.1, pp.31-38.
  59. T. L. Teng and P. H. Chang, 2004, Numerical and Experimental Investigations on the Residual Stresses of the Butt-Welded Joints,J. of Computational Materials Science, Vol. 29, No. 4, pp.511-522. [SCI, EI]
  60. T. L. Teng, F. A. Chang, C. P. Peng and B. W. Yang, 2004, The Analysis of Neck Injury of Occupant in Rear-End Crashes, Journal of Medical and Biological Engineering, Vol.24, pp.13-18. [EI]
  61. T. L. Teng, F. A. Chang, C. P. Peng and C. H. Wu, 2004, The Establishment of SID Numerical Model, Journal of Medical and Biological Engineering,Vol.24, pp.19-28. [EI]
  62. T. L. Teng and P. H. Chang, 2004, Fatigue Life Prediction for a T-joint fillet welds, Journal of SNAME R.O.C., Vol.23, No.1, pp.1-11. [EI]
  63. T. L. Teng, C. C. Liang and C. C. Lu, 2004, The Analysis of Anti-Penetration Properties of Space Armor on Ship, Journal of SNAME R.O.C. , Vol.23, No.1,pp.39-47. [EI]
  64. T. L. Teng and P. H. Chang, 2004, Effect of Residual Stresses on Predicting Fatigue Crack Initiation Life for Butt Joints, Journal of Materials Processing Technology. Vol.145, N0.3, pp.325-335 [SCI, EI]
  65. T. L. Teng, Y. A. Chu, F. A. Chang and H. S. Chin, 2003, The study of failure behavior in steel fiber RC plate under low speed impact, Journal of Mechanic.Vol.19, N0.2, pp.125-141. [SCI, EI]
  66. T. L. Teng, Y. A. Chu, C. Chung and H. S. Chin, 2003, The Study of Modifying the Premature Analysis of Modeling, Journal of Mechanic. Vol.19,N0.2, pp.79-89. [SCI, EI]
  67. T. L. Teng and P. H. Chang, 2003, Fatigue Crack Initiation Life for a Flat Plate with a Central Hole, Journal of C. C. I. T., Vol. 32, No.1, pp 45 –58. [EI]
  68. T. L. Teng, Y. A. Chu and H. S. Chin and H. S. Chin, 2003, The Dynamic Analysis of Nuclear Waste Cask under Impact Loading, Annals of Nuclear Energy, Vol. 30, No.14, pp 1473 – 1485. [SCI, EI]
  69. T. L. Teng , C. P. Fung and P. H. Chang, 2003, Effect of Residual Stresses on Fatigue Life of Butt Joints using Thermal Elasto-Plastic and Multiaxial Fatigue Theory, Engineering Failure Analysis, Vol. 10, pp 131 – 151. [SCI,EI]
  70. T. L. Teng, C. C. Liang and T. H. Yen, 2003, The Structure Shape Design of Vertical Launching Canister on Ship, J. of SNAME R.O.C., Vol. 22, No.1, pp39 – 45. [EI]
  71. T. L. Teng, P. H. Chang and W. C. Tseng, 2003, Effect of Welding Sequence on Residual Stresses, J. of Computer and Structure, Vol. 81, No.5, pp 273 –286. [SCI, EI]
  72. T. L. Teng, Y. A. Chu and H. S. Chin, 2003, The Application of Equivalent Inclusion Method in Reinforced Concrete Structure Analyses, Journal of Mechanic, Vol. 19, No.1, pp 17 – 28. [EI]
  73. C. C. Liang, T. L. Teng and C. Y. Yu, 2003, Biodynamic Response of Shipboard Human Body to Vertical Shock Motion, J. of SNAME R.O.C. , Vol.22, No.2, pp 73 – 86. [EI]
  74. T. L. Teng and P. H. Chang, 2002, Effect of Weld Geometry and Residual Stresses on Fatigue in Butt-Welded Joints, International J. of Pressure Vessel and Piping, Vol.79, pp.467-482. [SCI, EI]
  75. T. L. Teng and P. H. Chang, 2002, The Prediction of Fatigue Life in weldments Based on Thermal Elasto-Plastic and Multiaxial Fatigue Theory,Transaction of the Aeronautical and Astronautical Society of the Republic of China , Vol.34, No.4, pp.319-329. [EI]
  76. T. L. Teng, Y. A. Chu and M. C. Lee, 2002, The Analysis on Penetration Behavior of Protective Structure Subjected to Impact, J. of Explosives and Propellants, Vol.18, No.1, pp.63-82.
  77. T. L. Teng and P. H. Chang, 2002, The Effect of Hole Geometry on Fatigue Strength of a Flat Plate, Journal of C. C. I. T. , Vol.30, No.2, pp.37-50. [EI]
  78. T. L. Teng and C. C. Lin, 2001, Thermal Elasto-Plastic Analysis in Butt Welded Plates, Computer Modeling and Simulation in Engineering.(Accepted for publication) [SCI, EI]
  79. T. L. Teng and N. K. Hu, 2001, Analysis of Damping Characteristics for Viscoelastically Laminated Beams, J. Computer Methods in Applied Mechanics and Engineering, 190, pp.3881-3892. [SCI, EI]
  80. T. L. Teng, P. H. Chang and W. C. Yang, 2001, Analysis of Residual Stresses and Distortions in T-joint Fillet Welds, International J. of Pressure Vessel and Piping, Vol.78, pp.523-538. [SCI, EI]
  81. C. Chung, Y. A. Chu and T. L. Teng, 2001, The Study on Premature Analysis with Uniaxial-strain Method, J. of Explosives and Propellants, Vol.17, No.2,pp.13-25.
  82. T. L. Teng, Y. S. Tai, and C. Chung, 2001, The Behavior of the Cartridge Case and Chamber During Firing, Journal of Technology, Vol.16, No.3,pp.453-463.
  83. T. L. Teng, T. Y. Heh, M. J. Shieh and C. Chung, 2001, The Design and Analysis of Oleo-Pneumatic Shock Absorber, Journal of Hsiuping, Vol. 2,pp.173-196.
  84. T. L. Teng, W. C. Tseng and P. H. Chang, 2001, FEM Analysis of I Beam Connections in Fillet Welds, Journal of C. C. I. T. , Vol.29, No.2, pp.53-64.[EI]
  85. T. L. Teng and N. K. Hu, 2001, The Characteristics of Free Layer Damping Structures, Journal of C. C. I. T., Vol.29, No.2, pp.65-74. [EI]
  86. T. L. Teng and T. H. Yen, 2001, The Structure Strength Analysis of Virtical Launching Systems on Ship Subjected to underwater Shock and Bad Sea-state,J. of SNAME R.O.C. , Vol.20, No.1, pp.17-27. [EI]
  87. T. L. Teng, P. H. Chang and H. C. Ko, 2000, Finite Element Analysis of Circular Patch Welds, International J. of Pressure Vessel and Piping, Vol. 77,pp.643-650. [SCI, EI]
  88. T. L. Teng , C. P. Peng and C. Chung, 2000, A Study on the Application of Fuzzy Theory to Structural Control, J. Computer Methods in Applied Mechanics and Engineering, 189, pp.439-448. [SCI, EI]
  89. T. L. Teng and T. H. Yen, 2000, Analysis of Underwater Shock Considered Fluid-Structure Interaction, J. of Explosives and Propellants,.Vol.16, No.2,pp.29-44.
  90. T. L. Teng, Y. S. Tai , C. S. Liu and W. H. Lai, 2000, Strucyural Dynamic Analysis of Cartridge Case During Firing, J. of Explosives and Propellants,Vol.16, No.1, pp.29-42.
  91. T. L. Teng and C. J. Lin, 1999, The Study of Modifying the Boundary Conditions of Structural Modeling using Method, Journal of C. C. I. T.,Vol.28, No.1, pp.39-49. [EI]
  92. T. L. Teng and W. H. Cheng, 1999, A Effective Control System of Thrust and Moment Modulation for a Dynamically Positioned Vessel, Marine Geodesy,Vol.22, No.4, pp.211-227. [SCI, EI]
  93. T. L. Teng, C. C. Liang and C. C. Liao, 1999, Nonlinear Forced Vibration Analysis of the Rectangular Plates by the Fourier Series Method,Computational Mechanics, Vol.23, No,1, pp.1-7. [SCI, EI]
  94. C. C. Liang, T. L. Teng , W. H. Cheng, 1999, A Study of a Short-Baseline Acoustic Positioning System for Offshore, Marine Geodesy, Vol.22, No.1,pp.19-30. [SCI, EI]
  95. T. L. Teng, P. H. Chang, 1999, Welded Thermo-Elasto-Plastic Analysis in Thick Specimens, Transaction of the Aeronautical and Astronautical Society of the Republic of China, Vol.31, N0.2, pp.77-83. [EI]
  96. S. C. Lin, L. P. Tsao and T. L. Teng, 1999, The Three Dimension Analysis of Attack Tactics on Fighter to Missile, Journal of C. C. I. T., Vol. 27, No. 2,pp.11-20. [EI]
  97. T. L. Teng and C. H. Wu, 1999, Blast Resistant Study on Ship’s Structure, J.of SNAME R.O.C., Vol.18, No.1, pp.57-68. [EI]
  98. T. L. Teng and C. C. Lin, 1999, A Study on Improvement of Residual Stresses by Welding, Journal of C. C. I. T., Vol. 27, No. 2, pp.43-53. [EI]
  99. T. L. Teng, C. H. Wu and C. H. Lin, 1998, The Effect of Blast on Ship’s Structures, J. of Explosives and Propellants, Vol. 14, No. 2, pp.31-45.
  100. T. L. Teng and H. C. Ko, 1998, An Anaysis of Residual Stresses During Repair Welding, Journal of Technology, Vol.13, No.3, pp.379-387.
  101. T. L. Teng and C. C. Lin, 1998, The Effects of Welding Conditions on Residual Stresses Due to Butt Welds, Journal of Pressure Vessels and Piping,Vol.75, No.12, pp.857-864. [SCI, EI]
  102. T. L. Teng and W. H. Lai, 1998, A Study of Diving Depth on Deep-Diving Submersible Vehicle, Journal of Pressure Vessels and Piping, Vol.75,pp.447-457. [SCI, EI]
  103. C. H. Lin, T. L. Teng and C. Chung, 1998, Simulation and Experiment of Cutting Effect for Linear Shaped Charge, J. of Explosives and Propellants,Vol. 14, No. 1, pp.63-71.
  104. T. L. Teng and P. H. Chang, 1998, Three-Dimensional Thermomechanical Analysis in Circumferentially welded Thin-Walled Pipes, Journal of Pressure Vessels and Piping, Vol.75, No.3, pp.237-247. [SCI, EI]
  105. T. L. Teng and C. P. Peng, 1997, The Study on Active Structural Control Laws, Journal of C. C. I. T.,Vol.26, No.2, pp.103-115. [EI]
  106. T. L. Teng and P. H. Chang, 1997, A Study of Residual Stresses in a Multi-Pass Girth-Butt Welded Pipes., J. of Pressure Vessels and Piping,Vol.74, No.1, pp59-70. [SCI, EI]
  107. T. L. Teng, C. C. Liang and F. A. Chang, 1997, The Realization of Boundary Conditions in the Vibration Analysis of Plates, J. of the Franklin Institute ,Vol. 335, No.5, pp.799-812. [SCI, EI]
  108. T. L. Teng, C. C. Liang and C. C. Liao, 1996, Transient Dynamic Large Deflection Analysis of Panel Structure under Blast Loading, JSME Internation Journal, Vol.39, No.4, pp.591-597. [SCI, EI]
  109. T. L. Teng, C. C. Liang and C. C. Liao, 1996, Optimal Design of a Dynamic Absorber using Polymer-laminated Steel Sheets, Computers & Structures,Vol.60, No.6, pp.981-988. [SCI, EI]
  110. T. L. Teng, C. C. Liang and L. P. Tsao, 1996, The Design Implementation of the Barker Code Pulse Compression System, J. of SNAME R.O.C., Vol.15,No.2, pp.27-34. [EI]
  111. T. L. Teng and K. H. Yu, 1995, A Study of Dynamic Absorber using Damping Vibration Steel Sheets, J. of SNAME R.O.C., Vol.14, No.1,pp.15-31. [EI]
  112. C. C. Liang, C. C. Liao and T.L. Teng, 1994, A Galerkin Perburation Method for Nonlinear Dynamic Response of Ship Panel under Blast Loading, J. of SNAME R.O.C., Vol.13, No.1, pp.79-98. [EI]
  113. T. L. Teng, 1994, Optimal Design of Unstayed Polemast on Navy Surface Ship, Computer & Structures, Vol.50, No.3, pp.317-323. [SCI, EI]
  114. C. C. Liang, C. C. Liao, T.L. Teng and Y.Y. Jing, 1992, A Study of Strain Estimation in Stream Generator Dented Tubes, J. of SNAME R.O.C., Vol.11,No.2, pp.41-58. [EI]
  115. W. H. Chen and T. L. Teng, 1988, Ultrasonic Non-destractive Testing using Barker Code Pulse Compression Techniques, Ultrasonics, Vol.26, pp.23-26.[SCI, EI]
Tso-Liang Teng
Journal Articles
  1. P. C. Tung and S. C. Chang 1992 Journal of Chinese Society of Mechanical Engineering 13, 334-340. “The Dynamics of Whirling Pendulum”.
  2. P. C. Tung and S. C. Chang 1993 Journal of Chinese Society of Mechanical Engineering 14, 219-228. “Dynamics Stability of a Pendulum Supported in Circular Orbit and Feedback Control”.
  3. S. C. Chang and P. C. Tung 1998 Journal of Sound and Vibration .214, 853-872. “Identification of a Non-linear Electromagnetic System: an Experimental Study”.
  4. S. C. Chang and P. C. Tung 1999 Japanese Journal of Applied Physics 38,2175-2181. “Dynamics of a Non-linear Electromagnetic System”.
  5. S. C. Chang and P. C. Tung 1999 JSME International Journal Series C 42,982-990. “Nonlinear Identification of a Magnetic Bearing System with Closed Loop Control”.
  6. S. C. Chang 2001 Japanese Journal of Applied Physics 40, 6163-6170. " Dynamics of Magnetically Levitated Table with Hybrid Magnets".
  7. H. P. Lin, S. C. Chang and J. D. Wu 2002 Journal of Sound and Vibration 258, 987-999. “Beam Vibrations with an Arbitrary Number of Cracks”.
  8. S. C. Chang and H. P. Lin 2004 International Journal of Solids and Structures 41, 3491-3504. “ Chaos Attitude Motion and Chaos Control in an Automotive Wiper System”.(NSC 91-2745-P-212-003)
  9. S. C. Chang and H. P. Lin 2005 Journal of Sound and Vibration 279, 327-344. “Nonlinear Dynamics and Chaos Control for an Electromagnetic System”.
  10. H.P. Lin and S. C. Chang 2005 Journal of Sound and Vibration 281, 155-169. “ Free Vibration Analysis of Multi-span Beams with Intermediate Flexible Constraints”. S. C. Chang and P. C. Tung 2006 Journal of Sound and Vibration 290, 1335-1336.“Author’s reply”.
  11. S. C. Chang 2006 Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 220, 1119-1130. ”Application of Synchronization and Continuous Control of Chaos to a Chaotic Automotive Wiper System”. (NSC 93-2212-E-212-003)
  12. S. C. Chang and Seng-Chi Chen 2006 International Journal of Solids and Structures 43, 6998-7013. “Dither Signals with Particular Application to the Control of Windscreen Wiper Blades”. (NSC 93-2218-E-212-009)
  13. H.P. Lin and S. C. Chang 2006 International Journal of Mechanical Sciences 48, 1456-1463.“ Forced Responses of Cracked Cantilever Beams Subjected to a Concentrated Moving Load”.
  14. Shun-Chang Chang 2007 Proceedings of the Institution of Mechanical Engineers, Part D:Journal of Automobile Engineering 221, 1-12. ”Adoption of State Feedback to Control Dynamics of Vehicle with Steer-by-Wire System”. (NSC 94-2218-E-212-006)
  15. Shun-Chang Chang 2007 International Journal of Engineering Science 45, 628-643.“ Synchronization in a Steer-by-Wire Vehicle Dynamic System”. (NSC 95-2218-E-212-006)
  16. Shun-Chang Chang 2007 International Journal of Automotive Technology 8, 467-476. “ On Controlling a Chaotic Vehicle Dynamic System by Using Dither”. (NSC 94-2218-E-212-006)
  17. 張舜長、戴瑞言 2003 年3 月,” 智慧型車輛電能系統之研究”，汽車工程,第十七期,p.111-129。
  18. 張舜長、戴瑞言 2002 年4 月,” 電動汽車轉速模糊控制規劃”，汽車工程,第十六期,p.66-78。
  19. 張舜長、蔡耀文、翁大益 2007 年5 月，”鋰電池模型的實驗規劃建構與驗證”，汽車工程學刊,第四期, p.67-80。
  20. Yao-Wen Tsai, Shun-Chang Chang, K. David Huang, Chung-Hung Yang, Ming-Che Su,Te-Sheng Su, Jui-Hung Tai 2007年5月，”Study of Electrical Control Systems of a New Parallel Hybrid Electric Heavy Motorcycle,”汽車工程學刊,第四期, p.129-146。
  21. S. C. Chang and P. C. Tung 2006 Journal of Sound and Vibration 290, 1335-1336. “Author’s reply”.
  22. S. C. Chang and H. P. Lin 2008 Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. “Synchronization with Particular Application to the Control of a Chaotic Electromagnetic System”. (SCI) (accepted)
  23. 張舜長，鄭守安，曾嗣恩 2008年5月，”應用ADVISOR建構智慧型引擎冷卻系統模型”，汽車工程學刊，第五期，p.97-118。
  24. 張舜長，楊安石，侯孟良，詹宗興，林裕翔 2008，”新型噴油嘴實驗平台建構與測試”，科學與工程技術學刊。(已接受)
Shun-Chang Chang
Journal Articles
  1. Jeng, K. T., Wen, C. Y., Anh, L. D., “A study on mass transfer in the cathode gas channel of a proton exchange membrane fuel cell,” Accepted for publication in Journal of Mechanics on 6-December-2006. (SCI)
  2. Jeng, K. T., Lee, S. F., Tsai, G. F., Wang, C. H., “Oxygen mass transfer in PEM fuel cell gas diffusion layers,” Journal of Power Sources, No. 138, pp. 41~50. (2004). (SCI)
  3. Jeng, K. T., Kuo, C. P., Lee, S. F., “Modeling the catalyst layer of a PEM fuel cell cathode using a dimensionless approach, " Journal of Power Sources, No. 128, pp. 145~151. (2004). (SCI)
  4. Jeng, K. T., Chen, C. W., “Modeling and simulation of a direct methanol fuel cell anode,” Journal of Power Sources, No. 112, pp. 367~375. (2002). (SCI)
  5. 鄭錕燦，吳孟琪，“電動自行車動力系統解析，”代步與休閒產業雙月刊，pp. 7~18。2004年3月。
  6. 鄭錕燦，張文峰，陳玠汶，“引擎能量平衡及摩擦損失問題之探討，”中華民國汽車工程學會第十六期會刊，pp. 20~29 (2002)。
Kun-Tsan Jeng
Journal Articles
  1. S. A. Liu, Creep-Fatigue Rupture of A Thick Sphere Subjected to Pulsating Internal Pressure, J. CSME, V25(2004), p.363~372.
  2. S. A. Liu, A novel six-component force sensor of good measurement isotropy and sensitivities, Sensors and Actuators, A100(2003), p.223~230.
  3. 劉勝安, 賴豐言, Shape Optimal Design for Elastic Members of Strain-Gages Pressure Transducers, J. Da-Yeh Univ., V11(2002), p.33~40.
  4. 劉勝安, 綜合加工機動態特性與結構強化之研究,J. Da-Yeh Univ., V10(2001), p.61~67.
Sheng-An Liu
Journal Articles
  1. Jian-Da Wu, Chih-Jer Lin and Kun-Yin Kuo, A Study of Semi-Active Vibration Control for Vehicle Suspension System Using an Adjustable Shock Absorber, Journal of Low Frequency Noise, Vibration and Active Control (SCI.), 2007 Accepted (NSC-94-2218-E-018-001) (2006 I.F:0.171)
  2. C. J. Lin, G. Z. Chen, Y.X. Huang and J. K. Chang, “Computer-integrated micro-assembling with image-servo system for a microdroplet ejector,” Journal of Material Processing Technology (SCI.), in press, 2007.(NSC-95-2221-E-212-061) (2006 I.F:0.615).
  3. Chih-Jer Lin and Chieh-Li Chen, “Motion planning of redundant robots with singularities using transputer based fuzzy inverse kinematic method,” Lecture note on Artificial Intelligence, Vol. 4114, pp. 140-145, 2006. (SCI Journal)
  4. Chih-Jer Lin and Sheng-Ren Yang, “Precise positioning of piezo-actuated stages using hysteresis-observer based control,” Vol. 16, pp. 417-426, Mechatronics, 2006. (SCI, EI Journal)
  5. Chih-Jer Lin and Shu-Yin Chen, “Precision Positioning of Piezo-actuated Stages based on feedback control with GA modeling,” Vol. 507, pp. 487-492, Materials Science Forum, 2006. (SCI, EI Journal)
  6. Chih-Jer Lin and Sheng-Ren Yang, “Modeling of a Piezo-actuated positioning stage based on hysteresis observer,” Vol. 7, No. 1, Asian Journal of Control, pp.73-80, 2005. (SCI, EI Journal).
  7. Chih-Jer Lin, “Variable Structure Model Following Control of Robot Manipulators with High-Gain Observer,” Series C, Vol. 47, No. 2, pp. 591-601, JSME International Journal, 2004. (SCI, EI Journal) (NSC 90-2212-E-212-017)
  8. Chih-Jer Lin, “Motion planning of redundant robots by perturbation method,” Vol. 14, Issue 3, pp.281-297, Mechatronics, 2004. (SCI, EI Journal) (NSC 89-2218-E-212-016)
  9. Chih-Keng Chen, Chih-Jer Lin, Liang-Chun Yao, “Input-State Linearization of a Rotary Inverted Pendulum,” Vol. 6, No. 1, pp. 130-135, Asian Journal of Control, 2004. (SCI, EI Journal)
  10. Chih-Jer Lin, Chih-Keng Chen and Kai-Sheng Li, “An Extended Sliding-Mode Control for the Tracking Problem of A Rotational Invert Pendulum,” Journal of the Chinese Society of Mechanical Engineers, Vol. 24, No.3, pp.277-282, 2003. (EI Journal) (NSC 90-2212-E-212-017)
  11. Chih-Jer Lin, “Motion planning of redundant robots and avoidance of singularity,” Journal of Da-Yeh University, Vol.11, No.1, pp. 41-50, 2002.
  12. Chih-Jer Lin, Cha’o-Kuang Chen and Chieh-Li Chen, “Path planning and dynamic control of a redundant robot manipulator for conveyor tracking,” Int.J. of System Science, Vol.30, No. 5, pp. 491-503, 1999. (SCI, EI Journal)
  13. Chih-Jer Lin and Cha’o-Kuang Chen, “A constrained optimization approach for path planning of redundant robot manipulators,” JSME International Journal, Series C, Vol.41, No.3, pp.430-442, 1998. (SCI, EI Journal)
  14. C-L Chen and C-J Lin, “Motion planning of redundant robot manipulators using constrained optimization: a parallel approach,” Proc. Instn. Mech. Engrs. (ImechE), Vol. 212, Part.I, pp.281-292, 1998. (SCI, EI Journal)
  15. Chieh-Li Chen and Chih-Jer Lin, “Tracking control of robots using computed torque based sliding mode controller,” Journal of the Chinese Society Mechanical Engineers, Vol.19, No.2, pp.177-185, 1998. (EI Journal)
  16. Chieh-Li Chen and Chih-Jer Lin, “Motion planning of redundant robots,” Journal of Robotics System, Vol.14, No.12, pp.839-850, 1997. (SCI, EI Journal)
  17. C.J. Lin and C. Y. Lee, “Observer-based Robust Controller Design and Realization of a Gantry Stage,” submitted for International Journal of Machine Tools and Manufacture. (submitted)
  18. Chih-Jer Lin, Chieh-Li Chen and Wan-Quan Xu, “The cruise control of High Speed Train with the active suspension using the extended sliding-mode control,” International Journal of Vehicle Design (SCI, EI Journal) , (submitted)
Chih-Jer Lin
Journal Articles
  1. 陳俊達,“塑膠射出成形之電腦輔助模擬分析,” 金工, 25卷, 第2期, pp98-108, 1991.
  2. 陳俊達,黃東溢,謝佳儒,“射出壓縮成形自動化技術研究,” 金工特刊, pp160-167, 1992.
  3. Chun-Ta Chen, Roger-D. Quinn and Roy-E. Ritzmann, “The Cockroach Escape Response Circuit Provides an Excellent Basis for a Crash Avoidance System,” Soft Computing in Mechatronics, Physica-Verlag, pp.41-59, 1999.
  4. Chun-Ta Chen,Yueh-Cheng Liu,”A Thermoelastic Analysis on Steady-State Sliding Contact for Nonconforming Bodies,” Journal of DA-Yeh Universit, Vol. 11, No. 1, pp 69-76, 2001.
  5. Feng-Ming Wang, Chun-Ta Chen,Hou-Chin Yang,”FPGA-based Single-chip Controller for DC Motors,” Journal of DA-Yeh University, Vol. 11, No. 1, pp 59-63, 2002.
  6. Chun-Ta Chen, Chieh-Chuan Feng, and Yu-An Hsieh, “Design and realization of a mobile wheelchair robot for all terrain,” Advanced Robotics, Vol. 17, No. 8, pp. 739-760, 2003. (SCI, EI)
  7. Chun-Ta Chen, “A Lagrangian formulation in terms of quasi-coordinates for the inverse dynamics of the general 6-6 Stewart platform manipulator,” International J. of the Japan Society of Mechanical Engineers, Series C, Vol. 46, No. 3, pp 1084-1090, 2003. (SCI, EI)
  8. Chun-Ta Chen, Kun-Chieh Wang and Shinn-Woei Chou, “Enhancing the Performance of the Feed-Drive System in a Vertical Machining Center,”J. of Science and Engineering Technology, Vol. 3, No. 1, pp. 77-85, 2007.
  9. Chun-Ta Chen and Hua-Wei Chi, “Singularity-Free Trajectory Planning of Platform Type Parallel Manipulators for Minimum Actuating Efforts and Reactions,” Robotica, Vol. 26, No. 3, pp. 357-370, May, 2008. (SCI, EI)
  10. Chun-Ta Chen and Te-Tan Liao, “Optimal Path Programming of the SPM Using the Boltzmann-Hamel-d’Alembert Dynamics Formulation Model,” Advanced Robotics, 22(6), pp. 705–730, 2008. (SCI, EI)
  11. Te-Tan Liao and Chun-Ta Chen, “A Skew Ray Tracing Approach for the Error Analysis of Optical Elements,” Journal of Modern Optics, Vol. 55, No. 12, pp. 1981–2002, 2008. (SCI, EI)
  12. Te-Tan Liao, Shih-Hung Chen, Jing-Fung Lin and Chun-Ta Chen, “Modeling and Analysis of Transmission Optical Centering Device,” the Transactions of the Canadian Society for Mechanical Engineering (CSME), Vol. 32, No. 1, pp. 67–80,2008. (SCI, EI)
  13. Ravi Vaidyanathan, Chun-Ta-Chen, Chan-Doo Jeong, Charles Williams, Yochiro Endo, Roy E. Ritzmann and Roger D. Quinn, ” A Reflexive Control Architecture for Air and Land Vehicles Based on a Neural Model of the Cockroach Escape Response,” Advanced Robotics, Special Issue on Biomimetic Robots, 2008. (SCI, EI)(Submitted)
  14. Chun-Ta Chen and Te-Tan Liao, “A Hybrid Strategy for Time- and Energy-Efficient Trajectory Planning for Parallel Platform Manipulators,” Robotics and Computer-Integrated Manufacturing, 2008.(SCI, EI)(Submitted)
  15. Chun-Ta Chen and Hoang-Vuong Pham, “Enhanced Development of a New Stair-Climbing Robotic Wheelchair,” Industrial Robot, 2008. (SCI, EI)(Submitted)
Chun-Ta Chen
Journal Articles
  1. C.-F. Yung, Y.-W. Tsai and K.-K. Shyu, Applications of Routh-Hurwitz criterion to evaluation of phase margin and phase lead compensation, IEE-Electronics Letters,Vol. 27, No. 11, pp. 1000-1001, 1991. (SCI)
  2. K.-K. Shyu, Y.-W. Tsai and C.-F. Yung, A modified variable structure controller,Automatica, Vol. 28, No. 6, pp. 1209-1213, 1992. (SCI)
  3. K.-K. Shyu, Y.-W. Tsai and C.-K. Lai, Sliding mode control for mismatched uncertain systems, IEE-Electronics Letters, Vol. 34, No. 24, pp. 2359-2360, 1998.(SCI)
  4. K.-K. Shyu, Y.-W. Tsai and C.-K. Lai, Stability regions estimation for mismatched uncertain variable structure systems with bounded controllers, IEE-Electronics Letters, Vol. 35, No. 16, pp. 1388-1390,1999. (SCI)
  5. K.-K. Shyu, C.-K. Lai and Y.-W. Tsai, Optimal position control of synchronous reluctance motor via totally invariant variable structure control, IEE Proceedings-Control Theory and Applications, Vol. 147, No. 1, pp. 28-36, 2000.(SCI)
  6. K.-K. Shyu, Y.-W. Tsai, Y. Yu and C.-K. Lai, Decentralized dynamic output feedback co